X-S Speicification - 第18页
18 Placement Heads SIPLACE MultiStar (CPP) Increased Performance and Flexibility The SIPLACE Multistar is the perfect SIPLAC E solution: • In an increasingly complex production environme nt • For an in creasing d iversit…
17
Placement Heads
SIPLACE MultiStar (CPP)
SIPLACE MultiStar
component-camera type 30
(CPP)
SIPLACE MultiStar
Component camera type
33
(CPP)
Component range
a
a) Please note that the placeable component range is also affected by the pad geometry, the customer-specific standards,
the component packaging tolerances and the component tolerances.
01005 to 27 mm x 27 mm 0402 to 50 mm x 40 mm
Component specification
Max.height
b
Max. height
c
Min. lead pitch
Min. lead width
Min. ball pitch
Min. ball diameter
Min. dimensions
Max. dimensions
Max. weight
b) CPP head: in low installation position (stationary component camera not possible).
c) CPP head: in high installation position
6.0 mm
8.5 mm
0.3 mm
0.15 mm
0.25 mm
d
0.35 mm
e
0.14 mm
d
0.20 mm
e
0.4 mm x 0.2 mm
27 mm x 27 mm
4 g
d) For components < 18 mm x 18 mm
e) For components ≥ 18 mm x18 mm
11.5 mm
0.3 mm
0.15 mm
0.35 mm
0.2 mm
1.0 mm x 0.5 mm
50 mm x 40 mm
8 g
Programmable set-down
force
1.0 - 10 N 1.0 - 10 N
Nozzle types 20xx, 28xx 20xx, 28xx
X/Y accuracy
f
f) The accuracy value, measured using the vendor-neutral IPC standard.
± 41 µm/3
± 55 µm/4
± 34 µm/3
± 45 µm/4
Angular accuracy ± 0.4° / 3
g
, ± 0.5° / 3
h
± 0.5° / 4
g
, ± 0.7° / 4
h
g) Component dimensions between 6 mm x 6 mm and 27 mm x 27 mm.
h) Component dimensions smaller than 6 mm x 6 mm.
± 0.2° / 3
± 0.3° / 4
Illumination level 5 6
Possible illumination
level settings
256
5
256
6
18
Placement Heads
SIPLACE MultiStar (CPP)
Increased Performance and Flexibility
The SIPLACE Multistar is the
perfect SIPLACE solution:
• In an increasingly complex
production environment
• For an increasing diversity
of setup and production
strategies
• For a wide spectrum of
components
• For frequent product
changeovers.
It is even possible to place
larger components without a
noticeable drop in perfor-
mance. The SIPLACE Multi-
star is perfectly designed for
integration into a flexible and
speed-optimized production
environment.
One head for all applica-
tions
• The SIPLACE MultiStar
offers top flexibility
• It combines
Collect&Place mode with
Pick&Place mode
One head supports three
placement modes:
Elimination of bottlenecks
• A wider component spec-
trum
• Optimum performance uti-
lization
• More feeder module
tracks for the TwinStar
• Improved throughput due
to perfect line utilization
• More products in one set-
up family
Throughput
• Up to 23,000 components/
h benchmark value
• Up to 19,000 components/
h IPC 9850 performance
Collect&Place mode
Pick&Place mode
Mixed mode
19
Placement Heads
SIPLACE TwinStar (TH)
SIPLACE TwinStar
Fine-pitch camera
(component camera type 33)
SIPLACE TwinStar
Flip chip camera (option)
(component camera type 25)
Component range
a
a) Please note that the placeable component range is also affected by the pad geometry, the customer-specific stan-
dards, the component packaging tolerances and the component tolerances.
0402 to SO, PLCC, QFP, BGA, special
components, bare dies, flip-chips
0201 to SO, PLCC, QFP, sockets,
plugs, BGA, special components, bare
dies, flip-chips, shields
Component specs
b
Max. height
min. lead pitch
min. lead width
Min. ball pitch
Min. ball diameter
Min. dimensions
Max. dimensions
Max. weight
c
b) If the MultiStar and TwinStar are combined in the same placement area, the maximum component height may be
restricted.
c) If standard nozzles are used
25 mm (higher available on request)
0.3 mm
0.15 mm
0.35 mm
0.2 mm
1.0 mm x 0.5 mm
55 mm x 45 mm (single measurement)
For use with two nozzles
50 mm x 50 mm or
69 mm x 10 mm
For use with one nozzle
85 mm x 85 mm or
125 mm x 10 mm
up to 200 mm x 125 mm (with restric-
tions)
100 g
25 mm (higher available on request)
0.25 mm
0.1 mm
0.14 mm
0.08 mm
0.6 mm x 0.3 mm
16 mm x 16 mm (single measurement)
55 mm x 55 mm (multiple measure-
ment)
100 g
Programmable set-down
force
1.0 N - 15 N
2.0 N - 30 N
d
d) SIPLACE High-Force Head.
1.0 N - 15 N
2.0 N - 30 N
d
Nozzle types
e
e) Over 300 different nozzles and 100 gripper types are available, with an extensive nozzle database available online.
5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
Gripper
5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
Gripper
Nozzle spacing for P&P
heads
70.8 mm 70.8 mm
X/Y accuracy
f
f) The accuracy value, measured using the vendor-neutral IPC standard.
± 26 µm/3± 35 µm/4 ± 22 µm/3± 30 µm/4
Angular accuracy ± 0.05° / 3± 0.07°/ 4 ± 0.05° / 3± 0.07° / 4
Illumination level 6 6
Possible illumination
level settings
256
6
256
6