Cleaning SIPLACE Vision camera systems - 第15页
ASMP T GmbH & Co KG Rupert - Mayer - St raße 48 81379 Munich, Germany Subject to c hange without notice TI2024 - 03E09.doc 09.04.2025 Page 15 - 18 ENABLING THE DIGIT AL WORLD • Disconnect the ca ble’s con nector for …
ASMPT GmbH & Co KG
Rupert-Mayer-Straße 48
81379 Munich, Germany
Subject to change without notice
TI2024-03E09.doc
09.04.2025
Page 14 - 18
ENABLING THE DIGITAL WORLD
4.8 Cleaning the cameras SST34 / SST34G (board cameras)
Simple cleaning:
Simple cleaning of the board camera involves cleaning the optical system from the outside without
removing the housing.
Clean the optical system (orange arrow) and the fiber-optic cable (blue arrow) using the appropriate
tools.
Complete cleaning:
To perform complete cleaning of the board camera, it is necessary to remove the housing and the
illumination board.
• First, remove the cable’s strain relief clamp.
ASMPT GmbH & Co KG
Rupert-Mayer-Straße 48
81379 Munich, Germany
Subject to change without notice
TI2024-03E09.doc
09.04.2025
Page 15 - 18
ENABLING THE DIGITAL WORLD
• Disconnect the cable’s connector for the illumination board.
• Now release the four screws on the housing.
• Carefully pull the housing off in a straight line.
ASMPT GmbH & Co KG
Rupert-Mayer-Straße 48
81379 Munich, Germany
Subject to change without notice
TI2024-03E09.doc
09.04.2025
Page 16 - 18
ENABLING THE DIGITAL WORLD
• You can now carefully clean the optical system (sensor).
• Release the four hexagonal socket head screws in the corners of the housing in order to remove
the illumination board.