SM482PLUS_Maintenance(Eng_Ver2.7).pdf - 第72页
Mon thly Inspe ction Chap ter 5 Multi -Func tional Placer SM482PLUS Maintenance Handbo ok 5-1 9 Cleaning the Cover When cleaning the corresponding area, ensure the stickers attached to the machine are not detached. T ool…
Monthly Inspection
Chapter 5
Multi-Functional Placer
SM482PLUS Maintenance Handbook
5-18
Cleaning and apply grease, lubricating the conveyor LM guide, Lead screw
Monthly Inspection
Step 7.
Adjust the width of conveyor from the Min.to the Max. 3
or 4 times so that the grease can be properly distributed
throughout the whole section
1
2
3
①Select the <PCB Edit> Menu
②Select the <Borad> Submenu
③Enter minimum size in the Y direction in the <7. Board Size> group and
then click the <Conv.Width> Button. And Enter 200 (maximum size in the Y
direction) in the <7. Board Size> group and then click the <Conv.Width> Button
Step 8.
Release the emergency stop as described in “Releasing
‘Emergency Stop’ mode” on page 1-6 and perform the
operation again.
Monthly Inspection
Chapter 5
Multi-Functional Placer
SM482PLUS Maintenance Handbook
5-19
Cleaning the Cover
When cleaning the corresponding area, ensure the stickers attached to the machine
are not detached.
Tool for Maintenance
Utra-fine fiber cloth, Alcohol, Heavy Duty Staticide #2005, #2001
Measures
Caution
When cleaning the machine cover using alcohol or ethanol, exercise
care so that the sticker attached to the machine is not smeared with
alcohol or ethanol or it may become detached.
If it is detached, clean the location to which it was attached using
alcohol or ethanol, and attach a new sticker after contacting our
local agent.
if the machine is used for a long period of time, old stains on the
cover or faded cover paint may not remove easily even with alcohol.
In this case, repaint the cover.
Precautions when cleaning the acryl cover of door
Caution
Clean the acrylic cover of the door with a clean ultra-fine fiber cloth
wetted with the designated cleaning liquid (Heavy Duty Staticide
#2005, #2001 ).
The following activities will damage the ESD coating:
ㆍ Cleaning using hydrogen carbonate, ester, ketone, acid, strong
alkali or chemicals similar to these
ㆍ Cleaning by rubbing the acrylic cover applying strong force with
an ultra-fine fiber cloth
When the cleaning liquid designated by us is not available, clean
the acrylic cover using a small amount of neutral or slightly alkaline
cleaning liquid.
Cleaning the Cover
(Time required: 15min / No. M-11)
Multi-Functional Placer
MEMO
SM482PLUS Maintenance Handbook
5-20
Monthly Inspection