SM482PLUS_Maintenance(Eng_Ver2.7).pdf - 第9页
SM482PLUS Maintenance Handbook Chap ter 6 Appendix Consumable Parts List ............................................... 6-1 EC Declaration of Conformity ................................... 6-3 Chap ter 5 Monthly Inspect…
SM482PLUS Maintenance Handbook
Table of Contents
Chapter 1
Conditions for Maintenance
Common Working Procedure before Maintenance ..1-1
Common Working Procedure before Maintenance . 1-5
Working Environment and Condition ...................... 1-7
Tools for Maintenance .............................................. 1-9
Chapter 2
Inspection Items for Maintenance
Daily Inspections ........................................................ 2-1
Weekly Inspections....................................................2-3
Monthly Inspections (1/2) .........................................2-5
Monthly Inspections (2/2) .........................................2-7
Chapter 3
Daily Inspection
Checking and cleaning the nozzle ........................... 3-1
Cleaning the Dump Box ...........................................3-5
Cleaning the feeder and feeder base .......................3-6
Cleaning the Backup Table .......................................3-9
Checking and replacing the Air Filter ......................3-11
Checking and replacing the Mist Separator Filter .. 3-13
Multi-Functional Placer
SM482PLUS Maintenance Handbook
Chapter 4
Weekly Inspection
Cleaning the Head Fly Camera Lens ......................... 4-1
Cleaning the Head Mirror ......................................... 4-2
Checking and replacing the Solenod Valve .............. 4-3
Checking and Replacing the Head Vacuum Filter ....4-5
SM482PLUS Maintenance Handbook
Chapter 6
Appendix
Consumable Parts List ............................................... 6-1
EC Declaration of Conformity ................................... 6-3
Chapter 5
Monthly Inspection
Cleaning the Head Spindle ....................................... 5-1
Checking and Cleaning the Conveyor Sensor,
Fiducial Mark ...........................................................5-3
Checking and Cleaning the Cover Cooling Fan .......5-4
Checking and Cleaning the Cover Cooling Fan
Filter .........................................................................5-5
Cleaning and apply grease the Head Ball Spline,
LM Guide, Mirror CAM ...........................................5-6
Cleaning and Lubricating the X Frame LM Guide,
Ball Screw ................................................................. 5-7
Cleaning and Lubricating the Y Frame LM Guide ....5-9
Cleaning and Lubricating the Y Frame Ball screw ...5-11
Checking and apply grease the X Axis, Y Axis Flat
Cable ......................................................................5-13
Cleaning and apply grease, lubricating the conveyor
LM guide, Lead screw ............................................5-15
Cleaning the Cover ................................................. 5-19
Chapter 1
This Chapter describes the work environment and working tools for the maintenance of
the machine.
Conditions for Maintenance
Multi-Functional Placer
SM482PLUS Maintenance Handbook
1-1
Common Working Procedure before Maintenance
1. How to turn off the power supply
Turn off the main switch
①Press the 'STOP' button
②Press the 'RESET' button
③Select the File Menu
④Click the MMI 'EXIT' icon
⑤If a message reading "You can
turn off the system power supply
now" appears on the monitor,
turn off the main switch.
⑥Main Circuit Breaker OFF
1
2
4
3
5
6
Warning
System needs to be shut down after normally ending the MMI, otherwise, the machine might be damaged and injury could occur due to system error caused by
irregular shut down. Be sure to shut down the system after normally ending the MMI
Warning
If you do not turn off the main circuit breaker in the left lower cover of rear side before the maintenance, serious injury could happen. Must turn off the Main
Circuit Breaker before servicing. (Press the red switch.)
Chapter 1
Conditions for Maintenance
This Chapter describes the work environment and working tools for the maintenance of the machine.
Common Working Procedure before Maintenance