HS50的结构及原理 - 第162页
7 Collect & Place Head DLM1 Adjustment I nstructions SIPLACE HS-50 7.4 Dynamic Adjustment of the Axes Edition 05/00 162 NOTE If the P-g ain has b een adj usted co rrectly , a posi tioning ti me of 4 8 ms + 5 ms wi …
Adjustment Instructions SIPLACE HS-50 7 Collect & Place Head DLM1
Edition 05/00 7.4 Dynamic Adjustment of the Axes
161
$GMXVWPHQWRI3*DLQ
6,7(67
Å Select "C&P Heads" ==> "Select head" ==>
"Axis functions" ==> "Select dp - axis" ==> "Adjust P-gain".
Å With the help of the ÇÆ arrow buttons, set a distance of 3600 dgts.
Å If necessary, press the START button.
2VFLOORVFRSH6HWWLQJV
Å Adjust the P-gain, avoiding any oscillation of the current curve.
&KDQQHO 6LJQDO &RXSOLQJ <'HIOHFWLRQ 7ULJJHU ;'HIOHFWLRQ
CH1 Vnominal DC 2.0 V/ DIV
CH 4
negative
10% pre
10 ms/ DIV
CH2 deviat. of pos DC 0.5 V/ DIV
CH3 actual current DC 2.0 V/ DIV
CH4 end signal DC 5.0 V/ DIV
Sollwert /
Vnominal
Positionsabweichung /
deviation of position
Stromistwert /
actual current
Endemeldung /
end signal
7 Collect & Place Head DLM1 Adjustment Instructions SIPLACE HS-50
7.4 Dynamic Adjustment of the Axes Edition 05/00
162
NOTE
If the P-gain has been adjusted correctly, a positioning time of 48 ms + 5ms will be reached.
(See fig 7.4 - 11)
3*DLQWRR+LJK
NOTE
If the P-gain is set too high, the actual current will oscillate.
&KDQQHO 6LJQDO &RXSOLQJ <'HIOHFWLRQ 7ULJJHU ;'HIOHFWLRQ
CH1 Vnominal DC 2.0 V/ DIV
CH 1
negative
10% pre
10 ms/ DIV
CH2 deviat. of pos DC 1.0 V/ DIV
CH3 actual current DC 5.0 V/ DIV
CH 4 end signal DC 5.0 V/ DIV
Sollwert /
Vnominal
Positionsabweichung /
deviation of position
Stromistwert /
actual current
Endemeldung /
end signal
Adjustment Instructions SIPLACE HS-50 8 Other Instructions
Edition 05/00 8.1 Jumper Board
163
2WKHU,QVWUXF WLRQV
-XPSHU% RDUG