HS50的结构及原理 - 第17页
Adjustment Instructions SIPLACE HS -50 2 Operational Safety Edition 05/00 2.1 Safety Instructions 17 Å The opera tional safety of SMD au tomatic p lacement systems can be g uaranteed only if the system is used as presc r…
2 Operational Safety Adjustment Instructions SIPLACE HS-50
2.1 Safety Instructions Edition 05/00
16
– have been trained or instructed in the upkeep and use of appropriate safety equipment in
accordance with normal safety standards,
– have received first aid training.
&RUUHFW8VDJH
WARNING
The product must only be used for the applications specified in the catalogs and technical
descriptions, and then only in conjunction with non - Siemens devices and components that have
been recommended or approved by Siemens.
For the system to operate correctly and reliably, it must have been transported, stored, erected
and assembled correctly and must be operated and maintained with care.
,PSRUWDQW1RWHVRQ2SHUDWLRQDO6DIHW\
WARNING
The following points MUST be observed in order to maintain operational safety:
Å NEVER open one of the protective covers if you are not totally familiar with the use and
functioning of the machine!
Do not open the protective covers during operation unless you are asked to do so in this
manual or by the station software.
Å Only trained and qualified personnel may set the key switch to setup mode ("I").
During operation, do not set the key switch to the "I" position (setup mode) unless prompted to
do so in this manual or by the station software.
Å NEVER place your head or arms in the gantry travelling range while the station is switched on!
Å Never make changes, however minor, unless you are totally aware of the effect they will have
on the overall functioning of the system.
Å The stations must always be set up, retooled and maintained by appropriately trained
personnel.
Å Use original Siemens spare parts and authorized accessories only. The use of other parts will
affect safety and may invalidate the liability in case of any consequential damage.
Adjustment Instructions SIPLACE HS-50 2 Operational Safety
Edition 05/00 2.1 Safety Instructions
17
Å The operational safety of SMD automatic placement systems can be guaranteed only if the
system is used as prescribed and in accordance with the instructions in the User / Service
Manuals.
Å The key for opening the control and servo unit doors and the key for the key switch should be
kept in a place that is only accessible by qualified personnel.
Å If it is necessary to work on the machine and you do not have adequately trained personnel
available, always call in a Siemens service technician. Siemens AG will not accept liability for
any damage or consequential damage that is the result of incorrect work.
Å Machine operators must only carry out work for which they have been adequately trained and
are totally familiar with.
Å Always follow all safety regulations as specified for your country.
Å Do not make modifications to the safety equipment. In particular, NEVER bypass circuit -
breakers or remove safety devices.
Å If particularly hazardous situations are identified while the machine is in use, the machine
owner must immediately notify the manufacturer in writing so that appropriate action can be
taken to reduce the potential danger.
Å Protective devices must NOT be modified. In particular, circuit - breakers must never be
bypassed and protective devices must never be removed.
Å If particular hazards are identified while the machine is in use, the machine operator must
immediately notify the manufacturer in writing so that the manufacturer can take appropriate
action to minimize the potential danger.
DANGER
This machine is electrically operated. When electrical devices are in use, certain parts carry
dangerous voltage levels. Switch off at the main switch and disconnect the placement system from
the power supply before carrying out any work on live components. There is a risk of death, severe
injury and / or considerable damage to equipment if these instructions are not obeyed.
WARNING
Despite all the safety measures taken by the manufacturer, severe injury (e.g. from the gantry)
and / or considerable damage to equipment may result if the placement system is operated
incorrectly. For the machine to be safe, it must be used correctly by qualified personnel and all
warnings must be observed. Some work on the machine (e.g. setting up) requires special
training that goes beyond the scope of this manual.
