HS50的结构及原理 - 第94页
5 Single and Dual PCB Conv eyor Adjustment Instructions SIP LACE HS-50 5.4 Adjustment of the Proximity Switches PCB Stopp er Edition 05/00 94 $ GMXVWPH QWRIWKH3UR[LPLW \ 6ZLWF KHV3&%6 WR S SHU Å Utiliz e…
Adjustment Instructions SIPLACE HS-50 5 Single and Dual PCB Conveyor
Edition 05/00 5.3 Adjustment of Proximity Switches of Lifting Tables
93
$GMXVWPH QWRI3UR[LPLW\6ZLWFKHVRI/LIWLQJ7DEOHV
Å Adjust the distance between the proximity switch and the sprocket wheel to 0.4 mm.
.(<
(1) Proximity switch, lifting table (2 pieces)
(7) Sprocket wheel lifting table
(A) Distance proximity switch sprocket wheel = 0.4 mm
5 Single and Dual PCB Conveyor Adjustment Instructions SIPLACE HS-50
5.4 Adjustment of the Proximity Switches PCB Stopper Edition 05/00
94
$GMXVWPHQWRIWKH3UR[LPLW \6ZLWF KHV3&%6 WR S
SHU
Å Utilize the menu for the extraction of the PCB stopper.
6,7(67
Å Select "Transport functions" ==> "PCB conveyor 1 or 2" ==> "Stopper 1 (2)
retract / extract".
Å Carefully, move the proximity switch until contact is reached.
Å Pull back the proximity switch until a small gap of approximately 0.2 mm is reached, while the
contact must not get interrupted.
Adjustment Instructions SIPLACE HS-50 5 Single and Dual PCB Conveyor
Edition 05/00 5.5 Adjustment of Transport Parallelism
95
$GMXVWPHQWRI7UDQVSRUW3DUDOOHOLVP
.(<
(1) Reachable position for adjustment
(2) Spindle
(3) Toothed belt width adjustment
(4) Fixing screw
(5) Fixing plate
(6) Clamping piece