00196614-03_AI_Vakuumpumpe_SXDX12_de_en - 第111页

Fitting the Vacuum Pump 3.4.4 Connecting the Exhaust Tube ID100 [03087599-xx] Installing the Vacuum Pump Vacuum Pump Vakuumpumpe 111 3.4.4 3 . 4 . 4 C o n n e c t in g t h e E x h a u s t T u b e I D 1 0 0 [ 0 3 0 8 7 5 …

Fitting the Vacuum Pump

Installing the Vacuum Pump 3.4.2 Connecting the Vacuum Hoses to the Distributor Block

110 Vacuum Pump Vakuumpumpe

3.4.2

3.4.2 Connecting the Vacuum Hoses to the Distributor Block

Connecting the Vacuum Hoses to the Distributor Block

3.4.3

3.4.3 Fitting the Air Outlet Conduit [03079527-xx] Under the Machine

Fitting the Air Outlet Conduit [03079527-xx] Under the Machine

► Connect the vacuum hoses to the distributor block:

⇨ Hose 1 m vacuum pump SX12 [03090005-xx]

⇨ Hose 2 m vacuum pump SX12 [03090006-xx]

► For a complete head assembly, use the connections

in the row (1) or all angle connection in the row (2).

► If you are only connecting one head, close the con-

nections in the free row with dummy plugs.

Air outlet conduit before installation

The air outlet conduit must be placed under the machine

if the exhaust air is to be guided outside properly.

1. Slot

2. Screw and nib engage

3. Mounting plate

4. Stop position of pump

► The air outlet conduit is pushed under the pump dur-

ing installation, so that the screw fixed with adhesive

to the wedge and the nib on the base plate of the

pump (2) engage with one another. The wedge is

screwed to the mounting plate through the slots on

the left and right (1). (Screws: ISO4762-M8x40-A2-

70 [03042589-xx])

Fitting the Vacuum Pump

3.4.4 Connecting the Exhaust Tube ID100 [03087599-xx] Installing the Vacuum Pump

Vacuum Pump Vakuumpumpe 111

3.4.4

3.4.4 Connecting the Exhaust Tube ID100 [03087599-xx]

Connecting the Exhaust Tube ID100 [03087599-xx]

► Lift the vacuum pump and push in the air outlet con-

duit. It will engage into its end position on the assem-

bly plate.

► Screw the air outlet conduit on the left and right to the

fixture points shown before.

► You may want to have a flashlight ready to see your

workplace better.

► Fit the spanner wrench provided to the vacuum

pump, as shown in the diagram.

► Adjust the exhaust tube to a length of 120 cm.

► Position the exhaust tube onto the connecting piece

and run the hose along the side of the machine base

and out of the machine.

► Fasten the hose with a hose clamp Ideal Maxi W1

[03090050-xx] to position (1).

Fitting the Vacuum Pump

Installing the Vacuum Pump 3.4.5 Closing the Installation Location

112 Vacuum Pump Vakuumpumpe

3.4.5

3.4.5 Closing the Installation Location

Closing the Installation Location

► After fitting the pump, close the installation point with

the "cover plate assembly / P001" [03088818-xx].