00196614-03_AI_Vakuumpumpe_SXDX12_de_en - 第79页

Brief Description Vacuum Pump Vakuumpumpe 79 2 2 B r ie f D e s c r ip t io n Brief Description Every C&P head has a separate vacuum generator that supplies th e holding and placement circu it with the vacuum tha t i…

Introduction

Abbreviations 1.3.5 SIPLACE on the World Wide Web (WWW)

78 Vacuum Pump Vakuumpumpe

1.5

1.5 Abbreviations

Abbreviations

Abbreviations Description

CO Component

COT Changeover table

COT-i Changeover table insert

C&P Collect&Place

C&P12, CP12 Collect&Place head with 12 segments

C&P20, CP20 Collect&Place head with 20 segments

C&P20/A/M Collective term for C&P20, C&P20 A and C&P20 M

C&P20/A/M/P Collective term for C&P20, C&P20A, C&P20M and C&P20P

C&P6, CP6 Collect&Place head with 6 segments

CPP Collect&Pick&Place head

CPx Collective term for CPP, CP20, CP12 and/or CP6

DC Dual conveyor with two lanes

ESD Electrostatic sensitive device

EMC Electromagnetic compatibility

FHE Fast Head Exchange

ID Intermediate distributor

ID1, ID2 Intermediate distributor 1, intermediate distributor 2

MTC Matrix Tray Changer

NC Nozzle Changers

PA, PA1, PA2 Placement area, Placement area 1, Placement area 2

PCB Board

P&P Pick&Place

QC Quad lane conveyor with four lanes

SC Station computer

SC Single conveyor with one lane

SCS Single Core Solution

TH TwinHead

VS Vision system type

WPC Wafflepack changer

WPC4/5/6 Wafflepack changer version 4/5/6

Brief Description

Vacuum Pump Vakuumpumpe 79

2 Brief Description

Brief Description

Every C&P head has a separate vacuum generator that supplies the holding and placement circuit with

the vacuum that it needs.

The vacuum generator for the placement heads works according to the Venturi principle. In combination

with a vacuum pump, the compressed air consumption can be significantly reduced for the SpeedStar

(C&P20 A/P) head. The ongoing operating costs are reduced according to the energy costs.

NOTICE

C&P20 A/P heads

The vacuum pump used here can supply a maximum of two C&P20 A/P heads.

► The description of the following tasks and information for which the C&P20 A head is used

as example also apply to the C&P20 P. Any relevant differences are mentioned explicitly.

NOTICE

C&P20 P heads generally with vacuum

If the C&P20 P head is to be used on a machine in compressed air mode (Venturi), the head

must be converted with the "Conversion kit compressed air operation CP20 P" [03106765-xx].

For a conversion reversal from compressed air mode back to vacuum pump mode, you need

the aperture ring "Orifice plate cpl. CP20p [03108716-xx].

NOTICE

Conversion

If you need to convert a gantry from C&P20 A/P to TwinHead or CPP head, you must re-estab-

lish the original compressed air supply for this gantry. Conversion reversal must be performed

on all assemblies for this gantry.

NOTICE

Partial conversion

Partial conversion of the pneumatic unit, for example, involving disconnection of the gantry hos-

es (additional vacuum hoses) during compressed air operations, can lead to serious placement

machine malfunctions.

NOTICE

Retrofitting

If you need to convert a gantry from TwinHead or CPP head to C&P20 A/P head with vacuum

function, you must retrofit the vacuum equipment for this gantry.

NOTICE

Compressed air operation

If you operate a C&P20 A/P or a C&P12 (DLM) head which has been converted for vacuum

operation at a gantry with compressed air, this could lead to serious damage to the placement

head if the silicon hoses to the segments should loosen.

Brief Description

Erecting and Moving the Machine with Vacuum Pump Fitted

80 Vacuum Pump Vakuumpumpe

2.1

2.1 Erecting and Moving the Machine with Vacuum Pump Fitted

Erecting and Moving the Machine with Vacuum Pump Fitted

NOTICE

Folded hoses

Make sure that the hoses are never folded or pinched, not even during unpacking, as this

makes them unsuitable for further use.

NOTICE

Lifting the vacuum pump

When lifting the vacuum pump, always take hold of its base, as its center of gravity is above

this base and parts of the pump could be pulled off if you take hold of it elsewhere.

CAUTION!

When sliding the fork of a fork-lift truck or similar equip-

ment underneath the machine, lower the fork sufficiently

to ensure that any vacuum pump parts fitted underneath

the base unit (such as the vacuum pump fixture plate) are

not damaged.