1022330_6 Edison Safety 3 Dec 2015.pdf - 第28页
Safety (Edison) 28 This Page Intentionally Blank
. . . . .
SAFETY (EDISON)
Chemical Hazards
1022330_6 27
Safety Glasses
Caution. Wear protective safety glasses when handling solvent or printing media.
These chemicals can cause eye injury. Review Safety Data Sheet before use.
Safety Gloves
Caution. Wear protective gloves when handling solvent or printing media. Solvent
can cause skin irritation. Review Safety Data Sheet before use.
Safety (Edison) 28
This Page Intentionally Blank
. . . . .
SAFETY (EDISON)
Overview
1022330_6 29
Section E:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lockout/Tagout Recommendations
Overview
Introduction In order to ensure complete safety when maintaining and/or repairing the Edison
printer, Speedline strongly recommends adherence to approved lockout/tagout
practices. In addition to local procedures, Speedline recommends the following.
Pneumatics Pressing the Emergency Stop button automatically removes air from the printer (up to
the main air regulator).
Procedure Lockout your Edison printer as follows:
Step Action
1 Set the Main Circuit Breaker/Disconnect Switch to O (off).
2
Electrical Hazard
WARNING. Main Disconnect terminals are live. Speedline
recommends that the printer’s power cord be unplugged
from its power source for added safety.
Unplug the power cord from its power source.
3 Apply locking device and tags to the Main Disconnect switch. See
“Sample Lockout” on page 30.
ATTENTION
The Edison printer is designed to effectively dissipate stored
energy when power is removed. Once power is removed and
the system is locked and tagged, there is no danger of
electrical shock due to stored energy.