00193707-01 - 第48页
3 图形用户界面 SIPLACE 软件指南 SR.504.xx 3.4 2003 年 1 月版 48
SIPLACE 软件指南 SR.504.xx 3 图形用户界面
2003 年 1 月版 3.4
47
3.4
主视图流程图
3
3
3
Pull-down menus
3
Error information
bar
3
Status indication
and process status
3
Notification about a
specific action to
carry out
3
Information bar
2
Control modes:
Stand alone
SIPLACE Pro
2
Submenu icons with info box:
Main view
Setup
Error
Feeders
Gantry 1, 2
PCB conveyor 2, 1
Teach fiducial
Test component
SITEST
GEM
2
Output conveyor
The output conveyor is empty.
MTC on location 2
Central conveyor
The PCB is supplied.
Input conveyor
The input conveyor is empty.
2
Context-sensitive help system
This also provides a short description of all
displayed operating elements.
2
Help system for errors
Starts a help system displaying possible
causes of the current error along with correc-
tive actions.
2
Error deletion
After the error has been successfully cor-
rected, the currently active error is deleted.
Transport 2
Transport 1
2
Identifies the job or panel of the
right conveyor lane, or of the
single conveyor, and of the left
conveyor lane (dual conveyors
only).
2
Barcode-supported component
refilling
2
PCB barcode is activated.
2
Machine options have been
changed
2
Software options configured
2
Compressed air switch-off
mechanism configured
1234
1 No setup available on the corresponding location
2 Setup available
3 Setup available - at least one empty track error
4 Machine standstill due to track error
2
This display appears during the start-up process of the machine. Only when the
reference run has been completed successfully will the display appear in the form
of a button.
2
Status
The machine is running, or is in its 'ready' state.
Pressing the button:
The machine stops.
2
Status
The machine is placing components; 'stop' is activated. The assembly of the
PCBs located in processing conveyors 1 and 2 or in the central conveyor will be
terminated and the PCBs will be transported to the intermediate or output
conveyor. Subsequently, the machine will stop.
Pressing the button:
The machine continues to run without interruption.
2
Status
Machine is in the stopped state.
Pressing the button:
The machine resumes the placement operation.
3 图形用户界面 SIPLACE 软件指南 SR.504.xx
3.4 2003 年 1 月版
48
SIPLACE 软件指南 SR.504.xx 4 SIPLACE 生产线的接通和关闭
2003 年 1 月版 4.1 接通 SIPLACE 生产线
49
4 SIPLACE 生产线的接通和关闭
本章将介绍如何接通和关闭 SIPLACE 生产线。 4
4.1 接通 SIPLACE 生产线
4.1.1 启动 SIPLACE Pro 编程系统
Æ
从 Windows NT 中的 Start （开始）菜单中启动 SIPLACE Pro：
开始 --> 程序 --> Siemens SIPLACE
或
单击桌面上的图标 4
Æ 启动 SIPLACE Pro。
系统将连接到 SIPLACE ProServer 并打开 SIPLACE Pro 用户界面。 4
在等待系统连接到 SIPLACE ProServer 时，屏幕显示如下： 4
4
Fig. 4.1 - 1
启动
SIPLACE Pro