PS288_PS388_PS588_981-0424-002D - 第70页
Setup ■ Setting Up the Label Printing System 2—28 Data I/O • 981-0424 -002 back Note: If you have other options such as a r emote laser system or Serialization, contact Data I/ O Customer Support or a local Data I/O appr…
■ Setting Up the Laser Marking System ◘ Set Up for Camera Contrast
PS Series Owner’s Manual 2—27
back
Setting Up the Laser Marking
System
The PS System that is ordered with a Laser Marking System requires
no additional set up at a customer’s site. All software is installed and
all mechanical connections are complete—the laser marking system is
ready to use.
Your job file, created in TaskLink, determines whether or not devices
get marked.
Note: To use the laser marking system, a laser marking file must
first be created and added to a job file. For more information, see
(Optional) Creating a Laser Marking File on page 3-62.
If, for some reason, your winAH400.ini file requires changes, you can
set up the Laser Marking System as follows:
1. Edit the winAH400.ini file for Laser Marking—
1a. Using Windows Explorer, locate
C:\AH500\winAH400.ini
and m
ake a backup copy, for example,
WinAH400backup.ini
.
1b. Open the original file with Microsoft Notepad.
Locate the heading:
;------- Marking System Selection -----
1c. There is a list of marking system names. Remove the semicolon
from the Laser System corresponding to the one installed on
your PS System. Only one line should be without a semicolon.
;Markersystem=NONE
;Markersystem=LASERMARK
;Markersystem=SYNRAD
Markersystem=SYNRAD_DIGITAL
;Markersystem=ROFIN_SINAR
1d. Locate the heading:
;----- Laser System Definitions & Options ------
and set this line as follows;
for PS Models whose option bay has its own computer (and con-
nects to the PS with a serial cable) set
LaserRemoteConnection=TRUE
for PS Models whose option bay does NOT have its own com-
puter (and connects to the PS with a USB connection) set
LaserRemoteConnection=ETHERNET 139.138.240.31
1e. Save the
winAH400.ini
file and exit Windows Explorer.
If you have previously
used a Marking System,
you may already have
saved a winAH400.ini
file (with a modified
name) specifically for
that marking system
setup.
For more ini file infor-
mation, see the
on-screen Help.
Setup ■ Setting Up the Label Printing System
2—28 Data I/O • 981-0424-002
back
Note: If you have other options such as a remote laser system or
Serialization, contact Data I/O Customer Support or a local
Data I/O approved service representative.
Setting Up the Label Printing
System
If your PS System has the optional Label Printing System, it was
installed by Data I/O. If you need to remove, repair, or reinstall your
Label Printer, refer to the Label Printer Owner’s Manual that came
with your PS System. For questions and service contact Data I/O
Customer Support or a local Data I/O approved service representa-
tive.
PS Series Owner’s Manual 3—1
Chapter
3
3Operation
Two primary levels of operation of the PS288, PS388, PS588
(PS System) are • Operator functions, and • Administrator
functions.
Operators generally follow this sequence to process devices:
Figure 3-1: Operator Functions (begin on the next page).
Administrators generally follow this sequence to create jobs:
Figure 3-2: Administrator Functions (begin on page 3-31).
Shaded boxes are activities that are performed once per package type
(except possibly for very small devices).
Start TaskLink
Select Task and
Load Job
Set PS media
and options
Install media
and options
Run Job on
PS System
(Optional)
Create PS Sys-
tem security pro-
files
Create a Task
in TaskLink
(Optional)
Test First
Article
Teach the Ref-
erence Vision
File, page 3-34
Teach the Pack-
age File, page
3-40
(Optional)
Monitor statis-
tics
Check green rectangle locations:
•Quick Vision File Test (Page 39)
•(Optional) recommended check
(Page 41)
•Setting Input Media Rotation
(Page 42) It’s a master page
border.