PS288_PS388_PS588_981-0424-002D - 第83页

■ Operator Functions ◘ Running a Job on PS Systems PS Series Owner’s Manual 3—13 back . Figure 3-15: The AH5 00 main window opens with a job loaded and its name displa yed (arr ow). (PS588 shown.) (Optional) Preselecti n…

Operation ■ Operator Functions

3—12 Data I/O • 981-0424-002

back

Figure 3-13: TaskLink displays job transfer progress.

6. When job setup is complete, TaskLink displays the calculated

checksum and confirms launching the AH500 software if Dis-

play Checksum option is checked in TaskLink. Click Yes.

Figure 3-14: Click Yes to launch AH500 Software (if message displays).

7. On the AH500 main window under Current Job, the name of the

job just loaded is displayed.

■ Operator Functions ◘ Running a Job on PS Systems

PS Series Owner’s Manual 3—13

back

Figure 3-15: The AH500 main window opens with a job loaded and its

name displayed (arrow). (PS588 shown.)

(Optional) Preselecting Programmers

The PS288 & PS388 can be configured with up to four FlashCORE

programmers. The PS588 can be configured with up to 12 program-

mers, which can be a mix of FlashCORE and Universal OPTIMA pro-

grammers.

To improve efficiency, shut off programmers that are not used for a

particular job as follows:

1. On the AH500-PS System main window, click Preselect Program-

mers. Refer to Figure 3-15.

2. Click I (green side) of the Unlock Cnf button to allow changes.

3. For each programmer, click I (green side) of the button to enable

it or the O (red side) to disable it. See Figure 3-16.

Note: If a programmer does not have a Socket Adapter, or an incor-

rect Socket Adapter is installed, the programmer will automatically

be disabled.

Operation ■ Operator Functions

3—14 Data I/O • 981-0424-002

back

Figure 3-16: Preselecting programmers. In this image, programmers 1

and 2, are disabled. (PS588 shown.)

4. Lock the configuration again only if you wish to keep this setting

the next time the system is turned on: click the O (red) side of the

Lock Cnf button

Adjust Socket Opener Ribs

[PS288, PS388, and Optima on PS588 only]

1. Adjust the Socket Opener Ribs—

Note: It is necessary to adjust the Socket Opener after installing

different Socket Adapters.

1a. On the Power Panel, turn the main air valve OFF. (It is off when

the lock rings line up: some models.)