00198532-01_SM_MeasurementFeeder_EN - 第17页

2 Replacing spare parts 2.5 EDIF Service Manual SIPLACE MeasurementFeeder X 02/2020 17 2.5 EDIF Required spare part Fig.4: EDIF secondary assembly X8Smart Feeder module Item no. Designation MeasurementFeeder X 03125222-…

100%1 / 30
2 Replacing spare parts
2.4 Side cover left
16 Service Manual SIPLACE MeasurementFeeder X 02/2020
2.4.2 Fitting the side plate
► Carefully place the feeder module with the right
side down on a stable, level and clean surface.
► Place the side cover on the feeder as shown.
► Fasten the screws as shown in the diagram.
For the screws marked with C (ISO7380M2X2.5,
03045178-xx) you need an Allen key.
For the screws marked with B (SN2.5X6, 03033796-
xx) you need a TORX screwdriver.
► Fasten the screws as shown in the diagram.
For the screws marked with B (SN2.5X6, 03033796-
xx) you need a TORX screwdriver.
For the screws marked with A (7045M2.5X6,
0310209-xx) you need a Phillips screwdriver.
2 Replacing spare parts
2.5 EDIF
Service Manual SIPLACE MeasurementFeeder X 02/2020 17
2.5 EDIF
Required spare part
Fig.4: EDIF secondary assembly X8Smart
Feeder module Item no. Designation
MeasurementFeeder X 03125222-xx EDIF secondary assembly X8Smart
03012683-xx
03050957-xx
Pressure spring D-027
Collar screw D4x3.15 M3
Required tools
●
Flat-bladed screwdriver 0.9Nm
●
Phillips screwdriver 0.9Nm
●
TORX screwdriver 0.6Nm, size T8
2.5.1 Removing the EDIF
► Carefully place the feeder module with the right
side down on a stable, level and clean surface.
► Remove the left side plate (see section 2.4.1 "Re-
moving the side cover" [}15]).
► Loosen the two screws on the EDIF.
2 Replacing spare parts
2.5 EDIF
18 Service Manual SIPLACE MeasurementFeeder X 02/2020
► Remove the two fiber optics from the EDIF con-
nector.
► Remove the EDIF.
► Remove the two pressure springs.
► Loosen the nut.
► Remove the EDIF connector.