00198532-01_SM_MeasurementFeeder_EN - 第4页
4 Service Manual SIPLACE MeasurementFeeder X 02/2020 Table of contents
3Service Manual SIPLACE MeasurementFeeder X 02/2020
Table of contents
Table of contents
1 Introduction.. 5
1.1 Safety instructions.. 5
1.1.1 Conventions for the use of safety instructions and symbols.. 5
1.1.2 ESD.. 5
1.2 Environmentally-friendly disposal of materials and components.. 6
1.3 Use of original accessories and spare parts.. 6
1.4 Requirements.. 6
1.5 Information About This Service Manual.. 6
1.6 SIPLACE on the World Wide Web (WWW).. 7
2 Replacing spare parts.. 9
2.1 Overview.. 9
2.2 Front sliding guide / sliding foil.. 9
2.2.1 Removing the Front Sliding Guide.. 10
2.2.2 Fitting the Front Sliding Guide.. 11
2.3 Rear sliding Guide.. 12
2.3.1 Removing the Sliding Guide.. 13
2.3.2 Fitting the Sliding Guide.. 13
2.4 Side cover left.. 14
2.4.1 Removing the side cover.. 15
2.4.2 Fitting the side plate.. 16
2.5 EDIF.. 17
2.5.1 Removing the EDIF.. 17
2.5.2 Fitting the EDIF.. 19
2.6 Contact module.. 20
2.6.1 Removing the contact module.. 21
2.6.2 Fitting the contact module.. 22
2.7 Measurement board.. 24
2.7.1 Removing the measurement board.. 25
2.7.2 Fitting the measurement board.. 26
3 Synchronization.. 27
4 Service Manual SIPLACE MeasurementFeeder X 02/2020
Table of contents
1 Introduction
1.1 Safety instructions
Service Manual SIPLACE MeasurementFeeder X 02/2020 5
1 Introduction
1.1 Safety instructions
DANGER
Nonobservance of these safety instructions may cause injury to personnel and dam-
age to the machine!
► Please observe the safety instructions in the user manual of the relevant machine
for all work!
1.1.1 Conventions for the use of safety instructions and symbols
Safety instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-
lows according to the level of risk:
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property
may occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indic-
ates a part of the manual that requires particular attention.
Symbols
Example Description
Next This typeface marks controls and interface elements in the software.
► This symbol indicates actions that have to be performed by the operator.
1.1.2 ESD
CAUTION
Observe the ESD regulations!
When working on the feeder module, pay attention to ESD safety.
Before you open the side cover, make sure you are wearing the ESD protection wristband,
to prevent damage to the highly sensitive boards inside the feeder.