ESE E, H printer - 2024 - 第35页
Area Safety sensor Center V acuum pressure monitor sensor Mask Stencil detect sensor OPTION Safe area sensor is to protect unexpected accident. In case an operator just put his hand or some material without machine worki…
Real squeegee pressure closed Loop
Side (Y) clamp pressure control
OPTION
Real time squeegee (Front & Rear) pressure closed loop system
Digital indicator located to inside Squeegee head cover
Printing area pressure tolerance +/-1kgf/sec (+/-38um/sec)
Real squeegee pressure closed loop [ Load cell ]
: This optional function is to verify if the actual squeegee pressure for actual printing at printing
starting point is same with the programmed squeegee pressure. This is to confirm that a
printing pressure is same as like the setting pressure.
Real time squeegee pressure closed loop [ Load cell ]
: This optional function is to control actual printing pressure during whole printing.
Y ( Side ) Clamp pressure can be programmable and can be saved per
each product model
Area Safety sensor
Center Vacuum pressure monitor sensor
Mask Stencil detect sensor
OPTION
Safe area sensor is to protect unexpected accident.
In case an operator just put his hand or some material without
machine working stop, the machine will give Alarm with the
sensor located each side of front column.
Center vacuum pressure monitor sensor will
show to an operator current center table
vacuum
Mask stencil detect sensor
Enclosed Print Head Squeegee
Easy Clip (one-touch) Squeegee
OPTION
Special print head squeegee system for Packaging printing solution
Recommended to use after recharging 1000~1500g Solder
Keep same solder viscosity continuously with Automatic solder mixing &
rolling system
Automatic Solder rechargeable system
Note :
This kit should be keeping in storage box ( temperature 4
℃
+ max 7 days )
In case out of this standard, Please use after Whole kit cleaning and Solder
recharge
Easy Clip Squeegee
No need to assemble by screw
Saving squeegee change time