ESE E, H printer - 2024 - 第7页
Standard Enhanced Program ES-E & H * 2D inspection for solder excess, less, short and position error * SPI closed loop with Kohyong, Parmi, TRI, Pemtron, Cyberoptics * Production programming by network * Auto stencil…
Standard structure and Feature
High precise 4 Ball screws
with additional 3 shafts
Servo Control Table axis for
X, Y and Theta and also Z1 &
Z2
Most stable & perfect
structure to break up the
printing pressure equally and
to get a high printing quality
Most Stable & Perfect Table
Perfect Clamping
Auto calibration Squeegee Auto calibration Camera 3 stage conveyor Standard Wet. Dry. Vacuum
cleaning
Z ( Top ) clamp by precise
ball screw driven guides a
stable PCB loading and
much perfect PCB clamping
Center vacuum unit is for
individual support plate (JIG)
for very thin (less than 0.5mm
or 0.3mm) PCB and
whenever Users can put a
vacuum nest onto the table
Cylinder and Motor driven
printing head makes an
uniform printing result.
Depends on substrate
condition and solder paste,
standard squeegee or Easy
clip squeegee can be
applied.
Squeegee Z center position
auto calibration equipped
with software
Camera X and Y axis
driven & controlled by
ball screw and Servo
Camera recognizes a
mark on PCB and Stencil
at a time
Field of View 11mm x
8mm
The smallest Mark size is
0.1mm
For high throughput,
standard 3 stages
conveyor system
Automatic Width
adjustment system
Standard Dual vacuum. Wet. Dry
cleaning system
No clog solvent nozzle and even
solvent spray
Cleaning speed and Cleaning
mode (direction, repeat, group etc)
can be programmable
ES-E & H
Standard Enhanced Program
ES-E & H
* 2D inspection for solder excess, less, short and position error
* SPI closed loop with Kohyong, Parmi, TRI, Pemtron, Cyberoptics
* Production programming by network
* Auto stencil loading & positioning
* Auto camera calibration
* Auto Alignment before production (Easy Align)
* Auto stencil inspection & cleaning for a containment area
* Auto Squeegee center position calibration
* Auto Alignment accuracy measuring for table & camera
* ESE standard MES data
* Program for Auto PCB support tooling for Gridlock, Quik-Tool
* PCB barcode traceability by vision camera
2D inspection
Less, Excess, Bridge, Position
SPI close loop
Auto Camera calibration
Auto Stencil Inspection
Auto Alignment
Accuracy measuring
Auto Alignment
PCB barcode traceability
ESE standard MES data
Program by network
Retrofit Options
Touch screen monitor (22”)
Inside Temperature & Humidity display
Auto solder paste dispenser[ JAR or Tube type]
Solder paste roll height check system
Automatic Support Pin placemt
Glue Dispenser
Programmable Y (Side) Clamp pressure
Easy clip Squeegee system (one-touch)
Barcode Management (*RFID management available)
Side vacuum clamp tool
Side lifter for PCB edge support
Real Squeegee pressure closed loop
Real time squeegee pressure closed loop
Ionizer(Anti-Static) PCB cleaning
Air conditioner
Temperature controller
Center Table vacuum pressure sensor
Area sensor for satefy [Door both side ]
Auto solder dispenser
Solder height check
Glue dispenser
Auto support pin placement
Side clamp pressure control
Temperature & Humidity display
Auto side lifter system Vacuum Nest
Side vacuum clamp
Area safety sensor
Real squeegee pressure closed loop
Barcode / RFID management
Ionizer cleaning
Ahorro (hybrid) Cleaning system