4OM-1322-006_w.pdf - 第140页
2-3 AKOEMT -ID 1.1.1 "MAC. ERR." Window • Window Layout When the machine detects an error , the following "ERROR" window opens. [1] [2] [3] [4] [6] [5] Fig. 4B2 Example of "ERROR" Window • W…
2-2 AKOEMT-ID
[4] [MAINT. STOP] Button
Pressing this button displays the contents of a situation where the
machine has stopped under the condition specified in advance for
maintenance.
When this button flickers in blue and gray, it indicates that the machine
has stopped for maintenance concurrently with another error (machine
error).
Refer to "1.1.4 "MAINT. STOP" Window" for details.
[5] [Information] Button
Pressing this button displays the contents of an alarm issued under the
condition specified in advance in order to stop the machine due to a
shortage of components, etc.
When this button fl
ickers in blue and gray, it indicates that the above
condition is fulfilled concurrently with another error (machine error).
Refer to "1.1.5 "Information" Window" for details.
[6] [RESET] Button
Pressing this button cancels an alarm (sound) and closes the "ERROR"
window.
[7] [BUZZER RESET] Button
Pressing this button cancels an alarm (sound) only
.
Note
When a mark recognition error is displayed, refer to "6.2.3 Manual
Alignment Operation" in "Chapter 6" of "Volume 2" for details.
When the [STOP] button on the front operation panel is pressed
after the manual alignment operation, the "ERROR" window closes
and the previous window resumes.
0603-001
1.1 "ERROR" Window
2-3 AKOEMT-ID
1.1.1 "MAC. ERR." Window
•
Window Layout
When the machine detects an error, the following "ERROR" window opens.
[1] [2]
[3]
[4]
[6]
[5]
Fig. 4B2 Example of "ERROR" Window
•
Window Composition
[1] DA
TE
Displayed are the date and time of error occurrence.
[2] ITEM
Displayed is an error item.
[3] CONTENT
Displayed are the contents of an error.
[4]
ID
Displayed is a number that identifies an error.
When an error has occurred, use this ID as an index and refer to "2.
T
roubleshooting after Error Display" in "Chapter 2" for details.
0603-001
1.1 "ERROR" Window
2-4 AKOEMT-ID
[5] [RESET] Button
Pressing this button cancels an alarm (sound) and closes the "ERROR"
window.
[6] [BUZZER RESET] Button
Pressing this button cancels an alarm (sound) only.
•
Reset Procedure from "ERROR" Window
(1) T
ake notes of the descriptions under "ID", "ITEM", and "CONTENT".
Reference
When you have forgotten an error message, refer to the list of errors in the
"Machine Error Recall" tab sheet. (Operation Sequence: [RECALL MSG.]
Button (Submenu) → "Machine Error Recall" Tab Sheet)
(2) Press the [RESET] button to resume the original window.
Reference
Use the found ID as an index and refer to "2.2 Troubleshooting after Error
Display" in "Chapter 2" for details. Then, reset the machine to its normal
condition.
0603-001
1.1 "ERROR" Window