4OM-1322-006_w.pdf - 第17页

Safety Precautions Safe-4 AKOE-ID Precautions before Use  Conﬁrm that no covers are disengaged before operating the machine. If the machine is used with its cover(s) being detached, a serious ac cident may occur . Be su…

Safe-3

AKOE-ID

Safety Precautions

0704-002

2. Common Precautionary Items

Be sure to observe precautions below when working with the device.

Be sure to strictly keep the above-mentioned instructions. Otherwise, not only wrong

operations of the machine but also personal injury will result.

Basic Precautions



Only a well-trained person should operate the machine.

Do not allow any untrained person to operate the machine.

Mishandling of the machine can cause a serious accident.



Before operating the machine, please read the instruction manual carefully for correct

operations.



Please keep the instruction manual in a safe place within reach.



Follow the instructions in the instruction manual for correct handling of the machine.



Be sure to fully understand the contents of the safety instructions in the instruction

manual and follow the instructions.



Please pay special attention to the precautionary items labeled on the machine or

described in the instruction manual and be sure to keep them.

When the precautionary

items are ignored, it will result in personal injury or property damage (damage to the

machine).



Be sure to follow the operational instructions described in the instruction manual.



Do not modify the machine nor use any parts other than the speciﬁed ones for the

machine. Be sure not to use the machine with its safety devices detached. Doing

otherwise may cause personal injury

Also, be sure not to change the setting of the operating system nor install any software

additionally



Do not perform any operations other than those described in the instruction manual.

Whenever a problem arises, regarding the machine operations, performance, etc.,

please contact the marketing department or sales agency of Hitachi High-Technologies

for the solution.



Although the precautionary items have been reviewed repeatedly, an incident far

beyond our expectation may occur

Not only follow the precautionary instructions described in the instruction manual but

also try to handle the machine carefully at your discretion all the time.

Safety Precautions

Safe-4

AKOE-ID

Precautions before Use



Conﬁrm that no covers are disengaged before operating the machine.

If the machine is used with its cover(s) being detached, a serious accident may

occur.

Be sure to attach them in place.



Before turning on the power supply to the machine, make certain that no

per

son or object comes in contact with the moving mechanisms of the machine

so as to avoid any accidental injuries.

Do not start the machine unless those working in the immediate area of the

machine are aware of hazards from moving parts.



Do not set the [OPERATION/SET UP] switch to the "SET

UP" side for any

operations other than setup purposes.

When the switch is set to the "SET UP" side, setup operations become

possible with the door being open. It is very dangerous to operate the machine

without safety check. Be sure to pay special caution while operating the

machine.

The key shall be kept removed (excluding the time of setup operations) and

stored by the person in charge.



With the exception of industrial use alcohol, do not use cleaning solvents.

In particular, be sure not to use gasoline by mistake as it is highly ﬂammable.



As industrial alcohol is ﬂammable, be sure to keep it away from any possible

sources of ﬁre as it is likely to ignite and start a ﬁre.

Keep away from ﬁre.

void smoking and using ﬁre when near the device.



Industrial alcohol can cause poisoning, skin inﬂammation, or degreasing.

ry to wear goggles, protective gloves, a protective mask, etc., to protect

against spills on exposed skin.



Before starting the machine and after a setup operation, be sure to check if

any industrial alcohol is leaking from a crack of the hose joint or the hose itself

running between the solvent tank and the cleaning nozzle.

Do not operate the machine while industrial alcohol is leaking. Otherwise, the

leaking alcohol may catch ﬁre easily.

Refer to "2.1 Daily Maintenance" and "4.5 Checking of Industrial Alcohol Hose

and Joints" in "Chapter 1 (Vol. 4)" for the areas to be checked.

Whenever a leakage is found, contact our service person.

0704-002

Safe-5

AKOE-ID

Safety Precautions

0609-002



Do not change the set pressure of the regulator that is used to pressurize the

solvent tank.

(Regulator Set Pressure: 0.015 MPa)

If more than the speciﬁ

ed pressure is applied, the tank may explode.



Be sure to wear suitable clothes for working so as to avoid any injuries.

Try to bundle your hair in ponytail or a braid. Otherwise, your hair might get

caught in the moving mechanisms of the machine.

Be sure to fasten the buttons on your clothes (especially sleeves) to avoid

getting caught in the moving mechanisms of the machine.



Even after the [EMERGENCY STOP] switch is pressed, note that electrical

power is supplied to the control device.

o shutdown the power to all loads, set the power breaker to "OFF".

When an "Emer

gency Switch Off" function is required, it must be prepared outside the

machine on the customer side.

Emergency Switch Stop :

Emergency Interception of Controlled Load Power

Sources

Emergency Switch Off

: Emergency Interception of All Load Power Sources



In principle, the overall operation of the machine including the button

operations on the operation panel and the touch screen must be controlled by

only one person.

If there are more than one, ensure good communication by giving loud verbal

instructions.



Attach the internal lid of the solvent tank and tighten the cap securely.

If the cap gets loose, adequate pressure may not be applied or the solvent

may leak out.



Before starting the automatic operation, check carefully that there is no person around

the machine (especially on the other side of the machine operation). Make sure that no

objects (tools, parts, etc.) are left behind.



Data may become unavailable due to breakdown or mishandling of the machine.

It is strongly recommended that the compact ﬂ

ash (CF) memory data be periodically

backed up with the network terminal (option).