4OM-1322-006_w.pdf - 第20页
Safe-7 AKOE-ID Safety Precautions Notes on Installation, T ransfer and Maintenance Do not install or transfer the machine on the customer side after shipment. T o ensure perfect operation of the machine, including safe…
Safety Precautions
Safe-6
AKOE-ID
Notes on Machine Operations
This machine uses energetic driving systems and high voltage. This power and
voltage is high enough to cause death or serious injury. To avoid this danger,
respect the following guideline.
•
The machine must be used with the covers being attached.
•
Be sure to close the door before operating the machine.
•
Do not disengage the interlock mechanism of the door.
Whenever you feel danger or abnormality, immediately press the
[EMERGENCY ST
OP] switch to stop the machine.
If the machine is kept running in abnormal condition, an accident or a
breakdown will result.
When there is a problem with the machine, locate the cause and assess the
condition. Set the power breaker to "OFF".
After the problem has been rectified completely, reset the machine to its
normal condition.
Never remove the cap of the solvent tank while the machine is running.
Otherwise, the internal cap may pop out, dispersing industrial alcohol and
causing a personal injury (loss of eyesight, etc.).
When some industrial alcohol spills out of the solvent tank or the pan,
immediately stop the operation, turn off the power supply
, and wipe the spills
with a rag, etc.
Do not bring such a tank close to any heat of fi
re to evaporate the spilt alcohol
because it can catch fire very easily.
When the green lamp of the light tower is ON or flickering (ON and OFF), it indicates
that the static machine is in the "Automatic" mode (standby mode). Do not touch any
moving areas of the machine.
In case of a disaster of any kind, earthquake, storm, fl
ood, fire, or lightning,
immediately stop the machine and turn of
f the power supply
.
0704-002
Safe-7
AKOE-ID
Safety Precautions
Notes on Installation, Transfer and Maintenance
Do not install or transfer the machine on the customer side after shipment.
T
o ensure perfect operation of the machine, including safety and accuracy, only our
installation service department will install the machine or transfer it to another place.
Only the maintenance work on items described in this manual should be performed by
the customer. Please read the instruction manual carefully before maintenance work.
Do not perform any maintenance work on items that are not described in this manual.
Otherwise, not only breakdown of the machine but also personal injury may result.
When an alert label has deteriorated and become illegible, contact our service
department.
0603-001
Safety Precautions
Safe-8
AKOE-ID
Notes on Maintenance
Only a well-trained service person should perform maintenance work carefully
through for the machine in compliance with the instructions.
Before the maintenance work, be sure to turn off the power breaker and lock
them with padlocks.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its substitute.
Even when the power breaker is set to "OFF", the primary line is powered,
making it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before maintenance work.
Residual voltages may remain behind for a few minutes in the internal devices
of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of the DC power
supply and the servoamplifier go "OFF" in 10 minutes or more after the power breaker
is set to "OFF".
0603-001