4OM-1322-006_w.pdf - 第62页

1-3 AKOEMT -ID 1004-003 1.2 Preparation for Maintenance • V acuum Cleaner If the suction hole of the vacuum cleaner is changed to a smaller one, some spots can be cleaned more easily . • Air Blow Brush for Camera Use one…

100%1 / 211
1-2
AKOEMT-ID
1.2 Preparation for Maintenance
1004-003
1.2 Preparation for Maintenance
1.2.1 Preparation for Cleaning
•
Greasing Brush
Use a brush whose bristles do not come off if possible.
•
Rag (a waste piece of cloth)
Use a rag made of such material as cotton, etc., that produces as less waste
thread as possible.
A clean rag is also required, depending on the spots to be cleaned.
Notice
The remaining waste thread if any will cause the machine to break
down.
•
Oiled Rag
Use a rag made of such material as cotton, etc., that produces as less waste
thread as possible.
Too much grease should not be applied and any different type of grease
should not be mixed into the specified one.
Notice
The remaining waste thread if any will cause the machine to break
down.
•
Air Gun
Do not use the air gun for any spots other than the specified ones.
If dirt and dust are dispersed, they may adhere to the sensors and moving
mechanisms, causing the machine to break down.
Fig. 4A1 Air Gun
1-3
AKOEMT-ID
1004-003
1.2 Preparation for Maintenance
•
Vacuum Cleaner
If the suction hole of the vacuum cleaner is changed to a smaller one, some
spots can be cleaned more easily.
•
Air Blow Brush for Camera
Use one on the market.
•
Mirror
Use one on the market.
•
Container, etc.
Use a container big enough to hold water drained from the air regulator
while
cleaning the regulator.
•
Brush
Use a commercially available nylon brush.
•
Industrial Alcohol
Use the industrial alcohol described in Table 4A1 for this machine.
Table 4A1
Maker Product Name
DAN Chemical Co., Ltd Denatured Ethanol AP-7
Nihon Alcohol Hanbai Co., Ltd SOLMIX AP-7
When the industrial alcohol in Table 4A1 is unavailable, follow the mixture
ratio in Table 4A2.
Table 4A2
Chemical Element CAS No. Mixture Ratio
Ethyl Alcohol
64-17-5 80 to 90 %
Normal Propanol 71-23-8 5 to 10 %
Isopropyl Alcohol
67-63-0 5% or less
Obtain the material safety data sheet (MSDS) from the maker to learn the
precautionary points on handling and check the contents described in detail
for correct use.
1-4 AKOEMT-ID
1.2.2 Preparation for Lubrication
Prepare for the specified types of grease and lubrication tools.
Specified Greases
• DAPHNE EPONEX GREASE No. 1 (IDEMITSU KOSAN)
• MOLYNOC GREASE AP1 (NIPPON OIL CORPORATION)
Note
(a) Before lubrication, wipe off old grease. Otherwise, the effect of
grease and oil will decrease.
(b) Obtain the material safety data sheet (MSDS) from the maker to learn
the precautionary points on handling and check the contents described
in detail for correct use.
Same Types of Lubricants
• Lubricants equivalent to DAPHNE EPONEX GREASE No. 1 (IDEMITSU
KOSAN)
Table 4A3
Grease Names Makers
Alvania Grease No. 1 Showa Shell Sekiyu K.K
Multinoc Grease No. 1 NIPPON OIL
CORPORATION
Jomo Lisonix Grease No. 1
JAPAN ENERGY CORPORA
TION
Dynamax No. 1 COSMO OIL LUBRICANTS
Lithtan 1 ESSO OIL
MP Grease No. 1 KYGNUS
Gemico MP-1 T
onenGeneral Sekiyu K.K
Multemp PS1 KYODOH YUSHI CO., L
TD.
•
Lubricants equivalent to MOLYNOC Grease AP1 (NIPPON OIL
CORPORATION)
Table 4A4
Grease Names Makers
DAPHNE Grease M No. 1 IDEMITSU KOSAN
Jomo Lisonix Grease M-No. 1 JAP
AN ENERGY CORPORA
TION
Molybdenum Grease No. 1 COSMO OIL LUBRICANTS
BEACON Q2 ESSO OIL
Gemico MD2 T
onenGeneral Sekiyu K.K.
M5 GREASE 1 KYGNUS
0609-002
1.2 Preparation for Maintenance