ASM-X-Spec-SX12V2-EN-DMS - 第21页

21 Placement Heads SIPLACE SX1/SX2 Nozzle changer Technical Data Note: When you use the Smart Pin Support optio n, the maximum number o f nozzle changer mag- azines is reduce d. Nozzle changer for the SIPL ACE SpeedS t a…

100%1 / 80
20
Placement Heads SIPLACE SX1/SX2
Nozzle changer
Nozzle changer for the SIPLACE SpeedStar
Nozzle changer for the SIPLACE MultiStar
Nozzle changer for the SIPLACE TwinStar
Magazine for 12
type 10xx, 11xx or 12xx nozzles
Description
Nozzle changers increase the flexibility of the placement heads when it comes to processing
different components. The nozzle configuration can be rapidly adjusted to changing place-
ment jobs. Precisely defined positions and perfect nozzle seat in the garage ensure minimum
radial eccentricity on the placement head.
The nozzle changers are equipped with inbuilt monitors which check whether the nozzle mag-
azine is seated correctly on the mount. In addition, the nozzle changers recognize whether
the magazines are for 10xx, 20xx or 28xx nozzles by the code.
21
Placement Heads SIPLACE SX1/SX2
Nozzle changer
Technical Data
Note: When you use the Smart Pin Support option, the maximum number of nozzle changer mag-
azines is reduced.
Nozzle changer for the SIPLACE SpeedStar
Dimensions (length x width x height) 314 mm x 94.5 mm x 68.6 mm
Number of magazines 4
a
a) All magazines in the nozzle changer must be configured.
Number of nozzle garages 48
Standard configuration 4 magazines with 48 nozzle garages
Nozzle types 10xx, 11xx, 12xx
Compressed air connection 0.45 MPa (4.5 bar)
Nozzle changer for the SIPLACE MultiStar
Dimensions (length x width x height) 314 mm x 94.5 mm x 72.25 mm
Number of magazines 4
A
Number of nozzle garages 48
Standard configuration 3 magazines with 36 x 20xx nozzle garages
1 magazine with 9 x 28xx nozzle garages
Nozzle types 20xx, 28xx
Compressed air connection 0.45 MPa (4.5 bar)
Nozzle changer for the SIPLACE TwinStar
Dimensions (length x width x height) 314 mm x 68 mm x 49 mm
Number of magazines max. 8 magazines for max. 16 nozzle garages
Number of nozzle garages may be freely configured
Standard configuration 3 magazines with two nozzle garages each
1 magazine with one nozzle garage
Nozzle types 4xx with adapter
5xx (standard)
9xx with adapter
Special nozzle, gripper
22
PCB conveyor SIPLACE SX1/SX2
Single conveyor
Conveyor principle
Once the board has reached
the placement area, it is gen-
tly braked. As soon as the
board has reached its target
position, the conveyor belt is
stopped and the board is
clamped from below. The
placement process then
starts immediately. Move-
ment and clamping of the
PCBs is monitored.
Position of conveyor
edges
The conveyor can be easily
matched to many different
PCB widths by the automatic
electrical width adjustment.
The fixed conveyor edge
may be located on the left or
right for both the flexible dual
conveyor and the single con-
veyor.
Alternating placement
mode
In the proven SIPLACE
placement method, the two
heads process the boards
alternately on both conveyor
lanes. While the first head is
placing components on both
PCBs, the other head picks
up new components.
Single conveyor
On the single conveyor,
PCBs are moved one after
the other into the placement
machine and placed on a
conveyor lane. This con-
veyor variant is particularly
suitable for very wide PCBs.
Single conveyor