OM-1058-002 - 第18页
Tg0409-PM-SO 0410-002 17 Fig. 26 Attachement of Cover T ape (13) Set the cover tape on the take-up reel socket through the roller according to the instruction label. 2.1 Attachment of T apes Fig. 27 Instruction Label The…
Tg0409-PM-SO0410-002 16
(12) Attach the suppressor holding lever to
the suppressor hook section.
Slide the suppressor holding lever by press-
ing its lower section.
2.1 Attachment of Tapes
Fig. 22 Attachment of Front Hook
(11) Catch the pin with the front hook.
Slide the hook by pressing its lower section.
Fig. 24 Attachment of Suppressor
Holding Lever
OK NG
Fig. 23 Front Hook Attachment Condition
OK NG
Fig. 25 Suppressor Holding Lever
Attachment Condition (Opposite
Side)
If the tape feeder is used when the front hook and
the suppressor holding lever have come off, the
machine might be damaged or a pick-up error
occur.
Attach the front hook and the suppressor holding lever
correctly.
CAUTION
Tg0409-PM-SO0410-002 17
Fig. 26 Attachement of Cover Tape
(13) Set the cover tape on the take-up reel
socket through the roller according to
the instruction label.
2.1 Attachment of Tapes
Fig. 27
Instruction Label
The instruction label is attached to each tape feeder.
If the cover tape is taken up incorrectly, it might cause a take-up
error or feeding error.
• Instruction Label Enlarged View
Tape Feeder of 8 mm Width TF-0814 Tape Feeders of 12 mm Width or more
(except for TF-0814)
Notice
Note
Tg0409-PM-SO
(14) Attach the cover tape on the take-up
reel socket.
For tapes of 8 to 16 mm width, turn the
cover tape more than half-way around the
take-up reel socket, and catch it on the plate
spring.
Cut the cover tape if it has come out 2 to 3
mm from the plate spring.
Fig. 29
0410-002 18
2.1 Attachment of Tapes
Plate Spring
Cover Tape
Catch 2 to 3 mm of cover tape
and cut.
Note
Fig. 28
For tapes of 24 mm or wider, stick the cover
tape on the take-up reel socket with cello-
phane tape.
If the take-up reel socket is not set securely, the
take-up reel socket might come off during opera-
tion leading to a machine breakdown.
Turn the take-up reel socket in the arrow direction
(Refer to "Note" in Fig. 28) and make sure that the
plate spring is inserted until locked.
CAUTION