OM-1058-002 - 第56页
Tg0409-PM-SO 0410-002 55 5.3 Maintenance Method Fig. 82 T ake-up Reel Feed Roller (Only for the tape feeder of 8 mm width, except for TF-0814) Every month Lubrication Pressing the feed lev er , apply Ne w Molynoc Grease …
Tg0409-PM-SO0410-002 54
5.3 Maintenance Method
Fig. 81
Locating Lever Fulcrum Section
Every month Lubrication
Apply New Molynoc Grease No. 1 using a thin
bar.
After applying grease, move the locating lever
to ensure a smooth coating.
Tape Feeder of 8 mm Width
Tape Feeders of 12 mm
Width or more
Tape Feed Spring
Every month Lubrication
Apply New Molynoc Grease No. 1 using a thin
bar.
Apply grease on the section of .
Note
Tg0409-PM-SO0410-002 55
5.3 Maintenance Method
Fig. 82
Take-up Reel Feed Roller
(Only for the tape feeder of 8 mm width,
except for TF-0814)
Every month Lubrication
Pressing the feed lever, apply New Molynoc
Grease No. 1 using a thin bar.
Push
Feed Lever
Apply grease on the section of .
Note
Tg0409-PM-SO0410-002 56
5.3 Maintenance Method
Fig. 83
TF-0814 Tape Feeders of
12 mm Width or more
Tape Take-up Link
Fulcrum Pin of Tape Take-up Link
(Only for TF-0814 and tape feeders of
12 mm width or more)
Every month Lubrication
Remove the tape take-up link, apply
New Molynoc Grease No. 1 using a thin bar.
Apply grease from the top.
AA
View A
Tape Take-up Link Selection Section
(Only for TF-0814 and tape feeders of
12 mm width or more)
Every month Lubrication
Remove the tape take-up link, apply
New Molynoc Grease No. 1 using a thin bar.
Do not apply grease where it is
not necessary, dust or fibers might
adhere there and so might cause
a pick-up error.
Notice
Apply grease on the section of .
Note