OM-1058-002 - 第71页

Tg0409-PM-SO 0410-002 70 T able 10-10 6. Maintenance Component List

100%1 / 105
Tg0409-PM-SO0410-002 69
Table 10-9
6. Maintenance Component List
Tg0409-PM-SO0410-002 70
Table 10-10
6. Maintenance Component List
Tg0409-PM-SO
7. Troubleshooting
The main troubleshooting during the tape feeder operation is described here.
In the event of trouble, confirm in which section the trouble is caused and
set it right.
7.1 Component Pick-up Error
7.1.1 Component not correctly picked up in a certain tape feeder
0410-002 71
7. Troubleshooting
Table 11-1
Cause : Error in Pick-up Position
Cause : Shutter deformed
Remedy : Adjust the pick-up position by using the feeder adjusting jig JG-0148.
Refer to the instruction manual for the feeder adjusting jig JG-0148 for details.
Reference Page : Page 58
Feeder Adjusting Jig JG-0148
Pick-up Position
Remedy : Replace the shutter.
Reference Page : Page 13, 15, 59, and 62
If the component pick-up rate is degraded on the tape feeder during operation, the shutter
might be deformed.
If the shutter deformation (rise) is confirmed, replace the suppressor.
Notice
Shutter