00197684-02_AI_Innenraumbeleuchtung_SX12_de_en - 第27页

Introduction 1.1.1 Conventions for the use of safety instructions Safety Instructions Interior Lighting Innenraumbeleuchtung 27 1 1 I n t r o d u c t io n Introduction This manual describes installati on of the interior …

Einbau

Abschließende Arbeiten

26 Interior Lighting Innenraumbeleuchtung

Introduction

1.1.1 Conventions for the use of safety instructions Safety Instructions

Interior Lighting Innenraumbeleuchtung 27

1 Introduction

Introduction

This manual describes installation of the interior lighting option in SIPLACE® SX1/SX2 machines from

serial number L468 and M001 upwards.

1.1

1.1 Safety Instructions

Safety Instructions

Nonobservance of these safety instructions may cause injury to personnel and damage to the machine

1.1.1

1.1.1 Conventions for the use of safety instructions

Conventions for the use of safety instructions

This manual contains notes that must be observed to guarantee your personal safety and to avoid dam-

age to equipment. These notes are highlighted by warning triangles and are indicated as follows accord-

ing to the level of risk:

DANGER

Nonobservance of these safety instructions may cause injury to personnel and damage to the

machine!

► Please observe the safety instructions in the user manual of the relevant machine for all

work!

DANGER

Definition

For the purposes of this manual, this indicates that fatal or severe injuries or considerable dam-

age to property will occur if this hazard warning is not observed.

WARNING

Definition

For the purposes of this manual, this indicates that fatal or severe injuries or considerable dam-

age to equipment may occur if these warning instructions are not followed.

CAUTION

Definition

For the purposes of this manual, this indicates that minor injuries or damage to property may

occur if this caution is not observed.

NOTICE

Definition

For the purposes of this manual, this note provides information about the product or indicates

a part of the manual that requires particular attention.

Introduction

Safety Instructions 1.1.2 Safety Instructions for Working with Strong Magnetic Fields

28 Interior Lighting Innenraumbeleuchtung

1.1.2

1.1.2 Safety Instructions for Working with Strong Magnetic Fields

Safety Instructions for Working with Strong Magnetic Fields

Strong permanent magnet fields

Danger of crushing

Strong permanent magnet fields

1.1.3

1.1.3 Safety Instructions for the Power Supply (Without SMPS)

Safety Instructions for the Power Supply (Without SMPS)

Safety instructions fragment power supply - all machines without X module i.e. all machines except for SX12V2 from N001 and X-series S from H0 01

SXDX12V1V2

▪ This means that some parts of the system carry potentially lethal voltages - even when switched off

at the main power switch.

▪ Incorrect handling of the placement system can therefore result in fatal injuries, severe injuries or

considerable damage to equipment.

▪ Measurements and maintenance work must always be carried out by appropriately qualified person-

nel.

▪ Always follow the applicable accident prevention and DIN regulations (particularly DIN EN 60 204,

part 1) or the regulations specific to your country.

▪ Before starting any maintenance work, switch the machine off at the main switch and disconnect it

from the main power supply.

▪ Always secure the machine against unauthorized reactivation. If these instructions are not followed,

you may be able to touch live parts, which could result in fatal or severe injuries.

DANGER

Strong permanent magnet fields

Fatal hazard: persons with active implants (e.g. pacemakers, defibrillators, insulin pumps etc.)

are at risk from strong permanent magnetic fields inside the machine.

Persons at risk should avoid the immediate vicinity of the machine.

CAUTION

Danger of crushing

Danger of crushing for persons with passive metal implants (e.g. plates, screws).

► Do not reach or lean over into the machine when the protective covers are open.

► Do not bring any metal objects into the hazard area.

CAUTION

Strong permanent magnet fields

There is a risk that the strong magnetic fields could corrupt data on data media or check cards.

► Keep sensitive data supports away from the permanent magnets.

NOTICE

SIPLACE DX1/DX2 and SX1/SX2 to machine no. Mxxx

This section applies to machines of type SIPLACE DX1/DX2 and SX1/SX2 to machine no.

Mxxx without SMPS power supply.

DANGER

Hazardous Voltages!

The machine is supplied with 3 x 400 V~ (or 3 x 204 V~ / 3 x 220 V~ / 3 x 230 V~ / 3 x 380 V~

/ 3 x 415 V~) ± 5 %, 50/60 Hz mains voltages.

► Observe the safety instructions in the user manual during all service work!

► Before you start working on the power supply, check it for absence of voltage and observe

the waiting times!