N7201A616E00_0317 - 第115页

NPM-W 2 EJM7DE-MB-02 O-00 First layer Second layer Third layer Fourth layer 2-2-2 -14 Configures the defect bea m settings for the XY unit and the time variation correction set tings. XY unit Configures o ptional functio…

100%1 / 714
NPM-W2 EJM7DE-MB-02O-00
First layer Second layer Third layer Fourth layer
2-2-2-13
HeadCamera
Multi-
recognition
camera
Compo-
nent
names
Menu configuration 7
Operating procedure
2-2-2
Engineer mode 5
Displays multi-recognition camera
status and related information.
Machine
menu
Adjustment
Checks all recognition operations.
Displays head camera status and
related information.
Displays LED light status and related
information.
Displays the capture status of the
head camera and related information.
Configures the settings for
communication with LNB.
Whole
Configures the conditions for the
whole system operations.
Configures the indicating lamp and
buzzer settings.
Configures the indicating lamp and
buzzer settings during production or
under suspension.
Configures the monitor settings.
Setup
Tray
Checks tray unit operation.
Displays information on the feeders
installed to the machine.
Checks the motions of the feeders
installed to the machine.
Feeder
NPM-W2 EJM7DE-MB-02O-00
First layer Second layer Third layer Fourth layer
2-2-2-14
Configures the defect beam settings
for the XY unit and the time variation
correction settings.
XY unit
Configures optional functions.
Head
Configures the parameters to move
the head vertically.
Checks and configures the defect
head status.
Conveyor
Configures the optional functions of
conveyors.
Configures the parameters.
Feeder
Configures optional functions.
Configures the parameters.
Configures optional functions.
Configures the parameters.
Tray
Configures optional functions.
Configures the optional functions.
Configures parameters of head
up/down actions.
Checks and configures conditions of
a defect head.
Head
(Dispensing
head)
Preparation
Head
camera
Configures the parameters.
NPM-W2 EJM7DE-MB-02O-00
First layer Second layer Third layer Fourth layer
2-2-2-15
XY unit
Compo-
nent
names
Menu configuration 8
Operating procedure
2-2-2
Engineer mode 6
Machine
menu
Setup
Configures parameters.
Configures optional functions.
Height
sensor
Whole
Parameter
Confirms data check results.
Checks the origin offset.
Checks the offset of a reference mark of the
XY unit.
Checks the parameter for the plane
correction of the placement range.
Checks the offset of placement position.
Head
Checks the head rotation center offset.
Checks the offset at each head angle.
Checks the offset of the head origin.
Checks the nozzle changer offset.
Checks the parameter for load control.
(displayed when the 3-nozzle head is installed)
Configures the parameters.
Multi-
recognition
camera
Configures optional functions.