N7201A616E00_0317 - 第203页
NPM-W 2 EJM7DE-MB-03O-0 0 3-1-1 -4 Production 6 6 7 When the movable cover is open (In case ) (The movable cover is closed ) + ● For starting pr oduction, see “Star ting production” a nd “For independent mode”. Start pro…
NPM-W2 EJM7DE-MB-03O-00
Produc-
tion
Production start 2
Operating procedure
3-1-1
Move the Y-axis
Move the X-axis of which the feeder cart is detached until its end comes on the retract position
seal of the Y-axis
3-1-1-3
Retract position seal
X-axis end
2
1
OFF
SERVO
4
SERVO
ON
5
3
6
To
How to start production using an axis on the opposite side when the feeder cart is detached
■The machine without the independent changeover support unit (movable cover) (option)
Even though the feeder cart is detached in independent mode, production using an axis on the opposite side is
enabled. The preparation is described here.
Production is also enabled with the feeder cart attached.
Start production after attaching the feeder cart
■The machine with the independent changeover support unit (movable cover) (option)
NPM-W2 EJM7DE-MB-03O-00
3-1-1-4
Production
6
6
7
When the movable cover is open
(In case )
(The movable cover is closed)
+
●For starting production, see “Starting
production” and “For independent
mode”.
Start production
NPM-W2 EJM7DE-MB-03O-00
Stopping production
■To stop production immediately <single stop>
1
●Production stops.
●For dual lane, both lane
1 and 2 stop.
●To restart production
+
■To stop production after the PCB being produced is
completed <cycle stop>
1
●Production stops after
the PCB being produced
is completed.
●For independent mode,
select the lane.
●To restart production
+
Ends
production
+
Produc-
tion
Production stop and
end
Operating procedure
3-1-2
Ending production
2
Confirm the
message,
■To stop production after completing the PCB
production <Automatic stop>
After the planned PCBs are produced, production stops
automatically and the screen returns to the Home menu.
(→P.2-7-1)
3-1-2-1
Cancel stop
2
Before stop
1
2
■For manual operation