N7201A616E00_0317 - 第229页

NPM-W 2 EJM7DE-MB-03 O-00 3-2-3 -4 7 ■ T o check the data 8 (The recognition error image is displayed) ■ T o save the data 9 10 11 Confirm the message or Confirm the message ■ When you do not save the data ■ T o cancel 1…

100%1 / 714
NPM-W2 EJM7DE-MB-03O-00
4
A
B
Deletes the image.
Go to the previous/next image.
C
Returns to the previous screen.
B
C
3-2-3-3
A
4
7
Select
5
6
Confirm the message
or
Confirm the message
■When you do not save the data
5
6
Produc-
tion
informa-
tion
Operating procedure
3-2-3
Feeder pickup
information 2
3
3
:Displays all images.
: Displays the image of
the feeder address
specified on the
previous screen.
(Saves error histories)
: Displays all images.
Image display during operation
ON : Display
OFF: Non-display
2
(Recognition error image information
is displayed)
Choose an image to display
●All error images in the selected table
are displayed in reverse chronological
order.
● When a superimpose image is being
displayed, the tact time gets worse
about 5%.
NPM-W2 EJM7DE-MB-03O-00
3-2-3-4
7
■To check the data
8
(The recognition error image is displayed)
■To save the data
9
10
11
Confirm the message
or
Confirm the message
■When you do not save the data
■To cancel
12
10
11
8 9 12
●You can check the image per nozzle
resulting in error and save the data.
Select the nozzle position
Production
NPM-W2 EJM7DE-MB-03O-00
Produc-
tion
informa-
tion
Operating procedure
3-2-4
You can check component pickup information of a nozzle per head.
3-2-4-1
Head pickup
information 1
C
A
B
TBL (table)
A table referred to.
G
H
Shows the previous or next table.
NozzlePos
Nozzle installation position number of a
head.
●Perform on both and .
Nozzle No
Nozzle type being picked up
Total
Total of pickup count of all heads and
error count, and error occurrence rate for
total pickup count.
2
1DA C
HG
B E
F
I
D
E
F
Pickup Cnt
Number of components being picked up
per head
Err Cnt
Number of components resulting in error
Err Rate
Error occurrence rate for pickup count
Lane
Change the display item to “All” or
“Lane”. When “Lane” is selected, also
select the lane by the lane change
button.
I