N7201A616E00_0317 - 第290页
NPM-W 2 EJM7DE-MB-04O-0 0 4-4-2 -1 Operating procedure 4-4-2 1 1 A B C D PCB The number of NG PCBs / the number of PCB skip including the PCB pass. Ptn The number of NG patterns / the number of patterns actually inspecte…
NPM-W2 EJM7DE-MB-04O-00
4-4-1
2
2
1
3
+
Starting production
Operating procedure
4-4-1
Produc-
tion
When the production data teach ends, the production starts.
●Ensure that the power supply of the peripheral devices such as barcode reader is turned ON when
starting the production.
When an error occurs during self-diagnosis, the
corresponding item will be shown. Handle the error
accordingly.
NOTICE
Servo switch ON
Component
inspection
NPM-W2 EJM7DE-MB-04O-00
4-4-2-1
Operating procedure
4-4-2
1
1
A B C D
PCB
The number of NG PCBs / the number of
PCB skip including the PCB pass.
Ptn
The number of NG patterns / the
number of patterns actually inspected.
Cycle time
Cycle time 1:
The time (sec) elapsing between the
completion of clamping prior to placement
and the moment before the release of
clamping after the end of placement.
Cycle time 2:
The time (sec) for transporting, PCB waiting
and PCB loading
Num Isp view
The number of views inspected until now
/ the total number of inspection views
Process wait
Load wait:
Waiting for PCBs to be loaded from the
machine in the upstream process.
Unload wait:
Waiting for the machine in the downstream
process to be come ready for loading PCBs
Produc-
tion
Status monitor
E F GHE EF
A
B
C
D
E
You can check the inspection result of production PCB.
■When is displayed
NPM-W2 EJM7DE-MB-04O-00
4-4-2-2
Flow direction arrow
(Displayed only during selecting the
machine)
Blue:
Not waiting for process.
Yellow:
Waiting for process or reloading.
F
Component
inspection
Inspection result
G
H
Displayed when the machine is equipped
with the inspection head, or when the
ejection conveyor is placed just behind
the machine.
●Based on the inspection result on the
last PCB unloaded from the machine,
either of OK/NG is displayed.
●When a PCB comes to rest on the
ejection conveyor, the background
color turns yellow.
PCB marker
(Displayed while the machine is selected)
Displayed at the top right corner of the
screen when any defects are found on
PCB during inspection.
Yellow: when PCB inspection results
include any NG.
Light blue: when PCB inspection results
include any NG placement.
●When NG placement coincides with
NG, the marker is displayed in yellow
that is used in preference to light blue.