N7201A616E00_0317 - 第448页
NPM-W 2 EJM7DE-MB-06O-0 0 6-2-3 -3 Produc- tion data teaching PCB war page measur ement point teac h 2 (option) Operating procedure 6-2-3 2 + Confirm the message 3 1 T eaching procedure 1 2 (Selectable only when the warp…
NPM-W2 EJM7DE-MB-06O-00
6-2-3-2
Setting
change
Entering the PCB warpage measurement points data
Starting teaching
Choosing the measurement points data
Adjusting the position
Measurement test
Saving the data
Completion of teaching
Created by NPM-DGS
Teaching Flow
NPM-W2 EJM7DE-MB-06O-00
6-2-3-3
Produc-
tion data
teaching
PCB warpage measurement
point teach 2
(option)
Operating procedure
6-2-3
2
+
Confirm the message
3
1
Teaching procedure 1
2
(Selectable only when the warpage
mode is pattern.)
●Set the pattern number
4
3
(Confirm the PCB loading message
and place the PCB.)
5
5
(The PCB warpage measurement
point data is displayed.)
+
1
Select a lane
■For measuring per a point and change
the measurement point: To step
3
■For measuring all points and check
the result: To step
11
(The PCB is loaded and the
recognition mark is recognized.)
(For dual lane)
NPM-W2 EJM7DE-MB-06O-00
6-2-3-4
Setting
change
+
6
6
Select the coordinate No. to
measure
7
(The head camera moves to the
coordinates to measure so that you
can visually check the condition of
measurement point.)
7
●The center of the image displayed on
the screen is the measurement point.
●Visually check whether to be
appropriate or not the measurement
points on the PCB surface.