N7201A616E00_0317 - 第453页
NPM-W 2 EJM7DE-MB-06O-0 0 6-2-3 -8 Setting change
NPM-W2 EJM7DE-MB-06O-00
6-2-3-7
Produc-
tion data
teaching
PCB warpage measurement
point teach 4
(option)
Operating procedure
6-2-3
Teaching procedure 3
14
Displays the PCB warpage condition
15
Press any other menu button and
confirm the message
+
15
●Displays only when LNB is connected.
Z
Y
X
Front
The graph is as seen from the front
14
■When you do not unload the PCB
+
NPM-W2 EJM7DE-MB-06O-00
6-2-3-8
Setting
change
NPM-W2 EJM7DE-MB-06O-00
Produc-
tion data
teaching
If component recognition errors frequently occur, one of the factors might be pickup position or angle
misalignment. To calibrate the error, this section explains component recognition teach. Or, the
component data might be wrong so please check before teaching.
■A recognition error occurs at the specific feeder
■A recognition error occurs at the specific unit
A
Error name
B
Referred TBL (table)
C
ADR (address)
Feeder address
Checking recognition error
Component recognition
teach 1
The machine is single stop and error information is displayed.
Check on the error detail information screen. (→P.3-2-3)
6-2-4-1
●Perform on both and .
Operating procedure
6-2-4
A B C