N7201A616E00_0317 - 第467页

NPM-W 2 EJM7DE-MB-06O-0 0 T o reconfirm the result of 6-2-5 -4 Setting change 6 7 7 5 + 5 5 1 Confirm the recognition result ● Ensure [ANS=100 ] appea rs in the recognition res ult field. ● If ANS is 100 or less, repeat …

100%1 / 714
NPM-W2 EJM7DE-MB-06O-00
Produc-
tion data
teaching
Component
displacement check 2
Operating procedure
6-2-5
6-2-5-3
Multifunctional head-only function
2
1
3
This function, reserved for the multifunctional head, recognizes a component by rotating it in 1 degree
increments in the set angel range of ±5 degrees.
3
2
Perform steps from through
in (P. 6-2-4)
1
15
Choose a recognition method
● Perform on both and .
4
4
NPM-W2 EJM7DE-MB-06O-00
To reconfirm the result of
6-2-5-4
Setting
change
6
7
7
5
+
5
5
1
Confirm the recognition result
●Ensure [ANS=100] appears in the
recognition result field.
●If ANS is 100 or less, repeat from
Rθ : Recognition angle
ANS : Result
∆X : Recognition result from X
∆Y : Recognition result from Y
∆θ : Recognition result from θ
6
NPM-W2 EJM7DE-MB-06O-00
6-2-6-1
Operating procedure
6-2-6
Produc-
tion data
teaching
Part vacuum offset
teaching 1
Pick position teach is performed. It is used for a component that the pickup position is other than the center.
Specify the center of the component and then specify the pickup position.
C
A
B
ADR
Slot number arranging feeders
(Address number, arrangement position
(L/R))
X,Y
Moving amount of X and Y
Execute a feeding action of a feeder
G
E
F
Switch a lamp to adjust
Select a moving distance of an image
(“High” / “Low”)
Select a moving pitch of an image
(10 / 1.0 / 0.1)
D
Switch addresses
Change an amount of the lamp value
Adjust the lamp value
Scroll a component name if it is too long
to see
●Perform on both and .
A B
C
D
EFG