N7201A616E00_0317 - 第472页

NPM-W 2 EJM7DE-MB-06O-0 0 2 3 6-2-7 -1 2 1 Choose a recognition method Explains how to check nozzle height visually during pl ace ment, pickup and transcription by operating X-, Y-, Z-axis of the placement head. Operatin…

100%1 / 714
NPM-W2 EJM7DE-MB-06O-00
6-2-6-4
Setting
change
8
9
Confirm the message
9
■When you do not save the teach
result
8
NPM-W2 EJM7DE-MB-06O-00
2
3
6-2-7-1
2
1
Choose a recognition
method
Explains how to check nozzle height visually during placement, pickup and transcription by operating X-, Y-,
Z-axis of the placement head.
Operating procedure
6-2-7
●Perform on both and .
Produc-
tion data
teaching
Placement/pickup/trans
cription height check
4
3
4
1
15
Perform from steps through
in (P. 6-2-4)
NPM-W2 EJM7DE-MB-06O-00
+
5
5
6-2-7-2
6
Choose height action
■To check the nozzle height
when a component is placed
on a PCB
■To check the nozzle height for
transcription
●It is available only if the transcription
function is enabled.
A
( is displayed)
■To check the nozzle height when
a component is picked up from
the feeder
A
+
7
6
8
+
Confirm the message
(Z-axis moves to origin)
8
9
7
9
6
7
9
●Visually check that the nozzle is
lowered to a target position
(PCB, a component or
transcription.)
Setting
change