N7201A616E00_0317 - 第481页

NPM-W 2 EJM7DE-MB-06O-0 0 6-2-9 -4 Setting change T eaching with component (measuring method: 1 point) 1 1 2 Set a PCB on the PCB entrance 1 3 Choose a teaching mode ● The description below assumes to be chosen ● Perform…

100%1 / 714
NPM-W2 EJM7DE-MB-06O-00
6-2-9-3
Produc-
tion data
teaching
Placement coordinates
teach 2
Operating procedure
6-2-9
Choosing a measurement position
Measures the selected position to calculate the center coordinates of a component or an electrode on the PCB.
■Setting screen of the measurement position
■Measurement method and position button
Measurement
method
Button Component Electrode on the PCB
One point
Two points
Four points
Measure 1
Measure 3
Center
Measure 1
Measure 3
Center
Measure 2
Measure 4
Measure 2
Measure 4
Measure 2Measure 3
Measure 1Measure 4
Tape flow direction
Tape flow direction
Tape flow direction
Tape flow direction
Tape flow direction
Measure 2
Measure 3
Measure 1Measure 4
Tape flow direction
+
-
+
-
+
-
+
-
+
-
+
-
NPM-W2 EJM7DE-MB-06O-00
6-2-9-4
Setting
change
Teaching with component (measuring method: 1 point) 1
1
2
Set a PCB on the PCB entrance
1
3
Choose a teaching mode
●
The description below
assumes to be chosen
●Perform on both and .
NPM-W2 EJM7DE-MB-06O-00
6-2-9-5
Produc-
tion data
teaching
Placement coordinates
teach 3
Operating procedure
6-2-9
3
+
4
4
Teaching with component (measuring method: 1 point) 2
A
B
A B
Once an action starts, the button changes to “Stop”.
The head moves to the next coordinates and after it
stops and the time set on Teach image confirm
*1)
has
elapsed, it automatically moves to the next coordinates.
The action is repeated until the last coordinates
Press the [Stop] button on the coordinate you want
perform teach.
*1) (→ 7-1-2
-2 “Teach image confirm”)
If you press this button, the head stops on the
coordinate and you can perform teach.
Once an action starts, the button changes to
“Moving”.
Pressing the [Moving] button starts moving from
next coordinates.
●Movement also stops by pressing the [STOP]
key. However, if independent placement is
performed, the machine stops as single stop.