N7201A616E00_0317 - 第487页

NPM-W 2 EJM7DE-MB-06 O-00 6-2-9 -10 Setting change 5 + ● Align the cross line to the top of the component. Align the cross line to the edge of a component ● The edge face of the compone nt to align the cross line differs…

100%1 / 714
NPM-W2 EJM7DE-MB-06O-00
6-2-9-9
Produc-
tion data
teaching
Placement coordinates
teach 5
Operating procedure
6-2-9
1
1 7
2
3
+
and
and
or
4
■When components are placed
on the PCB, go to step
■When components are not
placed on the PCB, go to
step
5
7
●Perform on both and .
2 3
Perform steps from through
in [Teaching with component
(measuring method: 1 point) ]
Teaching with component (measuring method: 2 point) 1
NPM-W2 EJM7DE-MB-06O-00
6-2-9-10
Setting
change
5
+
●Align the cross line to the top of the
component.
Align the cross line to the edge
of a component
●The edge face of the component to align the
cross line differs depending on component
placement angle. (See below)
6
+
●Align the cross line to the right side of the
component.
●The edge face of the component to align the
cross line differs depending on component
placement angle. (See below)
Angle
0° 90° 180° -90°
Position
Measure 1
Measure 3
Measure 2
Measure 4
■Component edge face to align the cross line
6
5
are selected
■
are selected
When and
■
When and
●Notice1 (→P.6-2-9-7)
NPM-W2 EJM7DE-MB-06O-00
6-2-9-11
Produc-
tion data
teaching
Placement coordinates
teach 6
Operating procedure
6-2-9
7
+
●Align the cross line to the top of the component
electrode.
Align the cross line to an
electrode on the PCB
●The edge face of the component to align the
cross line differs depending on regular
component placement angle. (See below)
8
+
●Align the cross line to the right of the
component electrode.
●The edge face of the component to align the
cross line differs depending on regular
component placement angle. (See below)
Angle
0° 90° 180° -90°
Position
Measure 1
Measure 3
Measure 2
Measure 4
■Electrode position on a PCB align the cross line
+
8
7
are selected
■
are selected
When and
■
When and
Teaching with component (measuring method: 2 point) 2
●Notice1 (→P.6-2-9-7)