N7201A616E00_0317 - 第518页
NPM-W 2 EJM7DE-MB-06O-0 0 6-2-13 -3 2 3 4 4 Dispensing coor dina tes teac h 2 Produc- tion data teaching Operating procedure 6-2-13 Dispensing Creation procedure 1 1 1 3 Choose a teach mode. ● After this, it is described…
NPM-W2 EJM7DE-MB-06O-00
6-2-13-2
Teaching flow
Teach start
PCB transfer
Dispensing point set
A PCB is transferred.
Step from 1 through 7
Set the dispensing point to teach
dispensing coordinates.
Measurement 1 to 4 selection
Adjusts the positions of 4 measuring points such
as four corners of a component.
Meas. position
set
Center selection
■Adjusts the center
position of a
component
Moving the head camera
Inching
Present position confirmed
Inching
Modified position confirmed
Using a PCB, adjust a
placement position.
NO
YES
PCB transfer
Teach end
Last meas.
*)
Offset value calculation
*) Last measurement position
Selection of Meas.1,3: Meas.1→3(last)
Selection of Meas.2,4: Meas.2→4(last)
Selection of Meas.1,2,3,4:
Meas.1→2→3→4(last)
Selection of Part position specification:
Meas.1 →2(last)
Setting
change
NPM-W2 EJM7DE-MB-06O-00
6-2-13-3
2
3
4
4
Dispensing coordinates
teach 2
Produc-
tion data
teaching
Operating procedure
6-2-13
Dispensing
Creation procedure 1
1
1
3
Choose a teach mode.
●After this, it is described when
is chosen.
The operational procedure for a typical dispensing coordinates teaching is described here.
Dispensing/Pattern
Origin offset
Dispensing
Set a PCB on the PCB entrance
+
NPM-W2 EJM7DE-MB-06O-00
6-2-13-4
Select the SEQ number of a
component to evaluate
+
+
Choose the measurement
position
65
7
5
6
7
8
9
8 9
Setting
change