N7201A616E00_0317 - 第530页
NPM-W 2 EJM7DE-MB-06O-0 0 6-2-15 -3 Local height teac h 2 Produc- tion data teaching Operating procedure 6-2-15 1 1 In this section, typ ical loc al height tea ch procedure is exp lained. This explanation is under the co…
NPM-W2 EJM7DE-MB-06O-00
6-2-15-2
Setting
change
Selecting the teach data
Starting the teaching
Transferring a PCB
Selecting placement points
Moving a camera
Inching
Moving the data to teach
Measurement test
Select placement points to perform
teach.
Teaching is complete.
Transfers a PCB.
Unnecessary if you select from the
teach start screen.
Allows you to change the
recognition image status.
Teaches local height measurement
data of up to 5 locations.
Teaching Flow
NPM-W2 EJM7DE-MB-06O-00
6-2-15-3
Local height teach 2
Produc-
tion data
teaching
Operating procedure
6-2-15
1
1
In this section, typical local height teach procedure is explained.
This explanation is under the condition that the dispensing head and the height sensor are attached to the
front side head.
●You can operate only when the table with the height sensor placed is selected.
3
3
2
2
Choose the desired data to
perform local height teach
NPM-W2 EJM7DE-MB-06O-00
6-2-15-4
Setting
change
4
+
●The PCB is checked and the rail width
is adjusted as necessary.
4
A
F
A
CompName
The component name to place to the
Placement coordinates measuring the
local height by teaching.
5
Teach local height coordinates
E D C
B
5
B
Measurement point
The points of local height measurement
data target for teach are displayed. (5 points
at maximum)
C
Z
The misaligned amount from the PCB
top surface reference at selecting local
height measurement coordinates.
D
X/Y
The amount of inching for position
adjustment
E
The view size of the recognition image is
changed.
F
The amount of inching for position
adjustment is changed.
●After changing to the PCB loading standby
status, place the PCB on the loading entrance.
(Unnecessary if the PCB has already been on
the stage)
NOTICE
●
+