N7201A616E00_0317 - 第543页

NPM-W 2 EJM7DE-MB-07 O-00 7-1-1 -4 No. Item name Function when [ON] is selecte d 25 Supply position fix when recovery Picks up parts from the feeder at the supply positio n determined by optimization when perfo rming rec…

100%1 / 714
NPM-W2 EJM7DE-MB-07O-00
7-1-1-3
No. Item name Function when [ON] is selected
13
Production
information not
picking up
management
Counts up all pickups attempted including parts empty and empty pockets of
the spliced tape feeders.
14
When parts for one
piece of PCB is being
supplied, restart
operation
When the machine has stopped due to a “parts empty” error, this option
allows production to be resumed by just replenishing at least one of the
exhausted feeders.
15
Mount speed escape
action
Allows the X/Y-axis to be retracted at the mounting speed for the part being
picked up when the machine has comes to a single stop due to a cushion
end error or mounting error.
16
Keep PCB recog lamp,
changing data
Keeps using the lamp value recorded in the machine, without performing
auto lamp teaching at PCB recognition during production changeover for
each machine.
17
PCB recognition lamp
value communication
set
Applies the lamp value recorded in the upstream machine to all downstream
machines, without performing auto lamp teaching at PCB recognition during
production changeover for each machine.
18
Return action
(when production
schedule pieces are
completed)
Returns the nozzles and trays at the end of automatic operation after the
scheduled production is reached.
19
Style and pickup
angle set freely
Enables the tape feeder or tray style (angle) and tray pickup angle (for 2-/3-
nozzle heads only) to be set in 1-degree increments.
20
Vacuum sensor error
opposing lane product
continue
If, in the independent mounting mode, the machine comes to a single stop
due to mounting error or vacuum sensor error caused by dropped part, this
option allows the opposing lane to continue production.
21
Auto log off in
production
Enables the automatic log off function during production.
22
Transfer error
opposing lane product
continue
Allows production on the opposing lane to continue even if a PCB transfer,
pickup, or position error has occurred.
23
PCB warp clamp 0
calibration
Generates the curved surface for PCB warp correction with the heights of
clamp positions as 0.
24
Change parts gap
action
(short distance)
Sets the range of measurement with the [Parts gap confirm] button on the
Parts recog. teach screen to “100 x 100 mm”.
Setting information 2
Unit
setting
Option setting 2
Operating procedure
7-1-1
● Default ：OFF
■Whole
NPM-W2 EJM7DE-MB-07O-00
7-1-1-4
No. Item name Function when [ON] is selected
25
Supply position fix
when recovery
Picks up parts from the feeder at the supply position determined by
optimization when performing recovery mounting after a parts empty or
pickup error.
26
Head camera barcode
recognition
The leading machine in the line receives the information of the bad mark
scanned by the third-part inspection machine, and transmits the information
to the subsequent machines. The leading machine also scans the PCB
barcode by the head camera and sends the information together with the bad
mark information to the host computer.
Setting information 3
● Default ：OFF
■Whole
System
administration
NPM-W2 EJM7DE-MB-07O-00
7-1-1-5
No. Item name Function when [ON] is selected
1
Nozzle 2D code
recog
Detects wrong nozzle setting and checks for proper orientation of nozzle on
the nozzle changer by recognizing the 2D code on the nozzle at the start of
automatic operation.
2
Can't use the Nzl
without 2D Code
Causes the machine to stop if nozzles without 2D code are mixed up.
3
2D code recognition
only when nozzle
exchange
Causestheheadcameratoskip2Dcoderecognitionofallnozzlessetinthenozzle
changerwhenrestartingthemachinethathasbeenstoppedduringproduction.
4
Temperature warning
check
Compares the current temperature of adhesive with the preset value on the
temperature control unit.
5
Inside changer auto
arrange
Rearranges the nozzles on the nozzle changer according to the data after
recognizing the nozzle 2D code.
6
Bad mark recognition
judge value is
variable
Uses the criterion value in the bad mark information to judge the bad mark
recognition for production boards.
7
Bad nozzle auto
change
If a certain nozzle is determined to be bad due to “Bad nozzle error rate”, this
option replaces the nozzle concerned with a normal one automatically. (12-
/16-nozzle heads)
8
Continue to product
when stuff detect
Allows production to be continued even after an error has occurred due to
detection of stuffed nozzle or filter.
9
Big nozzle manual
change (front side)
Enables the nozzles to be set manually without replacing them automatically.
10
Big nozzle manual
c
h
ange (rear side)
Enables the nozzles to be set manually without replacing them automatically.
No. Item name Function when [ON] is selected
1 Bad XY axis(front) Disables the front XY axis.
2 Bad XY axis(rear) Disables the front XY axis.
3
Time-lapse change
calibration during
producing of one
piece
Performs time-lapse change calibration during production of one PCB.
Setting information 4
● Default ：OFF
■ XY-axis
● Default ：OFF
■ Head
Unit
setting
Option setting 3
Operating procedure
7-1-1