N7201A616E00_0317 - 第551页
NPM-W 2 EJM7DE-MB-07 O-00 7-1-1 -12 No. Item name Function when [ON] is sel ected 1 One Side Mark Recog When a part of recognition mark on PCB is hidden behind the convey or rail, this option enable s recognition with vi…
NPM-W2 EJM7DE-MB-07O-00
7-1-1-11
No. Item name Function when [ON] is selected
11
Tray pickup order Y
direction change
(front)
Picks up tray parts (front side) in order in the longitudinal direction (Y
direction).
12
Tray pickup order Y
direction change
(rear)
Picks up tray parts (rear side) in order in the longitudinal direction (Y
direction).
13
Prod unused parts
supply action
Prevents the pallets not used for production from moving to the tray supply
side even when parts are exhausted.
14
Return the parts
when teaching
Returns the tray parts used for teaching to their original positions after
teaching.
This enables recognition test for all the parts on the pallet after teaching.
15
RFID tray remain
correspond
Holds the parts remainder in the memory of pallets when RFID-supported
tray feeder is used.
16
No tray remain RFID
load confirm
No confirmation dialog for loading parts remainder is displayed when RFID-
supported tray feeder is used.
17
Do vacuum miss
check before tray
action
Sets the tray change timing after checks component pickup by the vacuum
sensor before changing trays during production.
Setting information 10
● Default ：OFF
■ Tray
Unit
setting
Option setting 6
Operating procedure
7-1-1
NPM-W2 EJM7DE-MB-07O-00
7-1-1-12
No. Item name Function when [ON] is selected
1
One Side Mark
Recog
When a part of recognition mark on PCB is hidden behind the conveyor rail,
this option enables recognition with visible area of the mark.
2
Detect mark
appropriate
determine
Prevents false detection of marks in the following cases:
(1) Uneven luster in area other than mark
(2) Land patterns open on one side
(3) Similar shape patterns other than mark
(4) Thru-holes of similar size other than mark
No. Item name Function when [ON] is selected
1
Save recognize
screen in time
Saves all images of the parts for which “Force to save the recognition OK
image” has been set in the production data, regardless the result of
recognition.
2
Micro parts takeout
detection
Recognizes the end of nozzle by the recognition camera and makes checks
by the vacuum sensor after mounting a part. If “part takeout” has occurred,
“mount error” is displayed.
No. Item name Function when [ON] is selected
1
Measure by the
height sensor (front)
Measures the board height (warp) by the height sensor, in order to control the
nozzle height during mounting or dispensing.
2
Measure by the
height sensor (rear)
Measures the board height (warp) by the height sensor, in order to control the
nozzle height during mounting or dispensing.
Setting information 11
● Default ：OFF
■ Head camera
● Default ：OFF
■ Multi-recognition camera
● Default ：OFF
■ Height sensor
System
administration
NPM-W2 EJM7DE-MB-07O-00
7-1-1-13
No. Item name Function when [ON] is selected
1
Production report
clear at auto product
change
Clears the production report at production changeover.
2
Production report
clear at the other lot
name auto product
change
Clears the production report only when changing production to a different lot
name.
The report is cleared also when the MJS ID differs.
3
Display transfer
direction of status
monitor PCB
Displays the PCB flow direction on the Status monitor screen.
4
Buzzer stop button
auto change
Changes the function button to [Buzzer stop] automatically when the buzzer
sounds.
5 PCB warp correction
Estimates the board warp based on the heights measured by sensor at
several points on the board, in order to control the mounting height.
No. Item name Function when [ON] is selected
1
Time-lapse change
calibration
Performs calibration for time-lapse change.
No. Item name Function when [ON] is selected
1
Vacuum sensor error
detection
Detects error by the vacuum sensor during automatic operation.
No. Item name Function when [ON] is selected
1
Nozzle center
measure
Measures the center of rotation and eccentricity of the nozzles used for
production by priming shot recognition during automatic operation in order to
improve the correction accuracy.
Setting information 12
● Default ：ON
■Whole (Suspension)
● Default ：ON
■ XY-axes (Suspension)
● Default ：ON
■ Head (Suspension)
● Default ：ON
■ Dispensing head (Suspension)
Unit
setting
Option setting 7
Operating procedure
7-1-1