N7201A616E00_0317 - 第592页

NPM-W 2 EJM7DE-MB-07 O-00 ■ If vacuum check has comple ted succe ssfully [Check vacuum complete ] is displayed in . ■ If vacuum check failed to complete successfully The backgr ound of the measured valu e of the corre sp…

100%1 / 714
NPM-W2 EJM7DE-MB-07O-00
(The support pin use nozzle will be
attached to the head)
(The support pin use nozzle will be
detached from the support pin use
nozzle changer)
2A
2
+
+
■To attach the nozzle
■To detach the nozzle
A
Support pin use nozzle changer
Displayed when automatic change function
specifications are selected for the support
pin. When attaching/detaching the support
pin use nozzle, you will select it.
7-2-5-6
Attachment/detachment of
the nozzle
System
administration
NPM-W2 EJM7DE-MB-07O-00
■If vacuum check has completed successfully
[Check vacuum complete] is displayed in .
■If vacuum check failed to complete
successfully
The background of the measured value of the
corresponding nozzle is displayed in yellow.
Unit
adjust-
ment
Action check of the
placement head
7-2-6-1
You can collectively check whether the actions of the placement head or nozzles are normal.
●Perform on both and .
Operating procedure
7-2-6
1
+
A B
C D
A
B
C
F
E
F
2
1
D
E
F
(The vacuum check result of each nozzle
is displayed)
Nozzle
A number of a nozzle attached to the
placement head.
●”-” is displayed if any nozzle is not
attached.
Sensor value
●If the measured value is abnormal, its
background is shown in yellow.
Full
●Filter clogging detection value. Check
if the measured value is abnormal as
the result of [Filter cleaning].
The previous or next table
is displayed.
Err.
●Nozzle clogging detection value.
Check if the measured value is
abnormal as the result of [Vacuum
check].
Message display area
NPM-W2 EJM7DE-MB-07O-00
■If air blow and the vacuum pressure
measurement results in error
Confirm the message
(The background of the measured value
of the corresponding nozzle is
displayed in yellow.)
7-2-6-2
+
2
(Air blow and the vacuum pressure of
each head (nozzles are removed) are
measured)
System
administration
■If air blow and vacuum pressure
measurement completes without error
[Cleaning blow complete] is displayed
in .
F