N7201A616E00_0317 - 第616页
NPM-W 2 EJM7DE-MB-07 O-00 You can check rotation cent er offset (calibration result) of each nozzle head. B A E C D 7-3-5 -1 Machine parame- ter Head r otation center ch e ck Operating procedure 7-3-5 Switches the displa…
NPM-W2 EJM7DE-MB-07O-00
7-3-4-2
System
administration
NPM-W2 EJM7DE-MB-07O-00
You can check rotation center offset (calibration result) of each nozzle head.
B
A
E
C
D
7-3-5-1
Machine
parame-
ter
Head rotation center
check
Operating procedure
7-3-5
Switches the display of [Rotate center]
to the value used in recognizing
components with the multi-recognition
camera.
Rotate center X[mm]/Y[mm]
XY coordinates of rotation center.
Switches to the value being temporarily
retained after measurement.
Standard value of rotation center that is
used in correcting temporal changes.
Amount of change in the reference
rotation center that occurs during
temporal change correction.
Placement head
A B
E DC
NPM-W2 EJM7DE-MB-07O-00
7-3-5-2
A B C
B
C
Displays parameters regarding rotation
center when the head is dispensed.
Displays parameters regarding rotation
center measured per nozzle.
Dispensing head
Rotate center X[mm]/Y[mm]
XY coordinates of rotation center.
A
System
administration