N7201A616E00_0317 - 第633页

NPM-W 2 EJM7DE-MB-07 O-00 Machine parame- ter T r ay origin of fset/ pic kup position c hec k Checking pickup position offset A Checking origin offset value A B You can check the tray feeder for the pickup position offse…

100%1 / 714
NPM-W2 EJM7DE-MB-07O-00
Machine
parame-
ter
Multi-recognition
camera check 2
A
Light mode
●Transparency: Transparency mode
●1: Reflection 1 mode
●2: Reflection 2 mode
●BGA: Reflection BGA mode
A
B C D
設備に設置されているフィーダーのメモリー情報を表示します。
Multi-recognition camera lamp value
B
Light
C
Standard value
Lamp standard value for each light
mode.
D
Offset
Lamp offset for each light mode.
Display Color Type
Transparency Red
Transparency
lighting
Reflection Brown
Reflection
lighting
Side Peach Side lighting
Enlarged drawing of
H
F EG
EF G
H
E
G
F
Side lighting
Transparency lighting
Reflection lighting
Operating procedure
7-3-17
7-3-17-3
NPM-W2 EJM7DE-MB-07O-00
Machine
parame-
ter
Tray origin offset/
pickup position check
Checking pickup position offset
A
Checking origin offset value
A
B
You can check the tray feeder for the pickup position offset of the tray feeder and the origin offset values of
TP-/TL-axes.
Operating procedure
7-3-18
●TP [mm]
Origin offset of TP-axis of the tray
feeder.
●TL [mm]
Origin offset of TL-axis of the tray
feeder.
Origin offset
Position offset X[mm]Y[mm]
Position offsets of marks A and B in X-
/Y-directions.
Position offset Z[mm]
Position offsets of mark C, D and E in Z-
direction.
7-3-18
System
administration
A B
B
Switches between Tray
A/ B.
■For the twin tray feeder
■For a single tray feeder,
not displayed.
A
B
C
C
Switches between Trays
A /B.
■For the twin tray feeder
■For the single tray feeder,
not displayed.
NPM-W2 EJM7DE-MB-07O-00
Feeder pickup position
A
B
Machine
parame-
ter
Feeder pickup position/
transcription position offset
checks
Operating procedure
7-3-19
Transcription position offset
A
B
A
B
Cart position offset
X[mm]/Y[mm]/Z[mm]
Position offset of the right/left carts.
Pickup position offset
X[mm]/Y[mm]/Z[mm]
Offset of feeder pickup position.
(X-/Y-/Z-coordinates)
Squeegee-axis offset
Trans pos offset Z[mm]
●Origin offset [pulse]
Origin offset of squeegee-axis.
●A: Gap 0.05mm[pulse]
Offset of the point A on squeegee-axis
(0.05mm position).
●B: Gap 0.50mm[pulse]
Offset of the point B on squeegee-axis
(0.50mm position).
Offset of transcription position in Z-axis
direction.
7-3-19
A B A
CD
C
D
Displays all values measured during
calibration. For the value shown as “－”,
it is measurement non-target data.
Displays the value measured when
pickup action is performed after feeder
cart is re-attached. Displays only the
value of a cart.