N7201A616E00_0317 - 第670页
NPM-W 2 EJM7DE-MB-09O -00 9-1-1 -13 Specifi- cation Mac hine specifica tions/ Basic perf or mance 7 Operating procedure 9-1-1 Dispensing head specification (option) Item Description Dispensing direction (angle) -180 ° to…
NPM-W2 EJM7DE-MB-09O-00
9-1-1-12
At
a glance
2D inspection head specifications (option)
Item Specification
Mass
*1)
Inspection box
70 kg (per unit)
This section describes the specifications of machines equipped with the 2D inspection head.
For specifications common to machines with the placement head only (→P.9-1-1
-1 to P.9-1-1-3)
*1) Mass of the main body excluding the optional units
■Machine specifications
■Basic performance
*2) It varies depending on the inspection conditions
Item 2D inspection head (A) 2D inspection head (B)
Resolution 18 μm 9 μm
Field of view 44.4 x 37.2 mm 21.1 x 17.6 mm
Inspection
time
*2)
Solder 0.35 s / view
Component 0.5 s / view
Target
components
Solder
Chip component: 0.1 x 0.15 mm or
over
Package component: φ 0.15 mm or
over
Chip component: 0.08 x 0.12 mm or over
Package component: φ 0.12 mm or
over
Component
Square chip (0603 or over), SOP, QFP
(0.4 mm pitch or over), CSP, BGA,
aluminum electrolytic capacitor,
volume, trimmer, coil, connector,
resistor network, transistor, diode,
inductor, tantalum capacitor, MELF
Square chip (0402 or over), SOP, QFP
(0.3 mm pitch or over), CSP, BGA,
aluminum electrolytic capacitor, volume,
trimmer, coil, connector, resistor network,
transistor, diode, inductor, tantalum
capacitor, MELF
Inspection
item
Solder Oozing, blur, misalignment, shape defect, bridge
Component Component existence, misalignment, flip-over, polarity, foreign matter inspection
Inspection position
accuracy
Cpk≧1)
± 20 μm ± 10 μm
Inspection
point
Solder
Maximum 30 000 point per machine (component point: Maximum 10 000 points
per machine)
Component Maximum 10 000 points per machine
NPM-W2 EJM7DE-MB-09O-00
9-1-1-13
Specifi-
cation
Machine specifications/
Basic performance 7
Operating procedure
9-1-1
Dispensing head specification (option)
Item Description
Dispensing direction
(angle)
-180° to 180° (in increments of 0.01°)
●Fixed at 0° for dummy
Dispensing range Conforming to the placement head
*1)
PCB flow direction Conforming to the placement head
Available nozzle count Up to 2 types
Dispensing tact time 0.16 s/dot (under optimum conditions)
Dispensing position repeat
accuracy
±0.075 mm (Cpk≧1.0)
Drawing tact time 3.75 s / Part (at the optimum condition)
Drawing position accuracy
±0.1 mm (Cpk≧1.0)
Temperature adjustment Heater
Dispensing pressure Programmable with the electropneumatic regulator
PCB changing time Conforming to the placement head
Adhesive ADE850D (recommended)
*2)
, ADE820DX (recommended)
*2)
Applicable component 1608 chip to SOP,PLCC,QFP,Connector,BGA,CPS
Dummy dispensing unit Standard equipment
Nozzle type
*3)
1-point nozzle
*4)
, 2-point nozzle, 4-point nozzle
Remaining amount
detection
After the detection of empty, stop or warning at the timing of arbitrary
dispensing
Such as solder apply, silver paste apply, and corner adhesive apply need technical confirmation.
1
) The value may vary by the anti-dispensing-on-rail function.
2
) For another maker, please consult us.
3
) As for the dispensing nozzle, there may be some changes.
4
) 1-point nozzle has two types of nozzles (dot dispensing and drawing dispensing)
NPM-W2 EJM7DE-MB-09O-00
9-1-1-14
At
a glance