00192169-01 - 第54页

Order No. 00192 169-01 User Manual - Productivity Lift E_SPLFS03_V40_11_0300_200300_V1_14.doc Last update: 20.03.2000 - Version V 1.14 Page 54 11 Description of interface An interface is required between adjoining machin…

100%1 / 110
Order No. 00192 169-01 User Manual - Productivity Lift
E_SPLFS03_V40_11_0300_200300_V1_14.doc Last update: 20.03.2000 - Version V 1.14 Page 53
Machine type: input module, cluster module, cross module
Length L1 540 mm
Width B 1045 mm
Height H 1200 mm with TH1 930 mm
Shuttle H1 760 mm
Weight 212 kg
Width adjustment  Shuttle with stepper motor
Width adjustment  Top conveyor manual
Machine type: output module
Length - lift L1 540 mm
Width B 1045 mm
Height H 1200 mm with TH1 930 mm
Shuttle H1 760 mm
Weight 212 kg
Width adjustment  Shuttle with stepper motor
Width adjustment  Top conveyor manual
Underfloor conveyor for Siplace  short for S20
Length lower belt L2 1595 mm
Total module length L3 2135 mm
Total unit length L4 2675 mm
Weight 90 kg
Width adjustment with stepper motor
Underfloor conveyor for Siplace  long for HS50
Length lower belt L2 2385 mm
Total module length L3 2925 mm
Total unit length L4 3465 mm
Weight 120 kg
Width adjustment with stepper motor
All machine types
Transport height - above TH1
930 mm ± 30 mm
Transport height - below TH2
170 mm ± 30 mm
PCB width 50 - 217 mm
PCB length 50 - 460 mm
PCB edging during transport 3mm
Interface  inlet ... Siemens SMEMA
Interface  outlet ... Siemens SMEMA
Automatic tracking none at inlet at outlet
Electrical connection 230V / 50Hz or 110V / 60Hz AC
Power input 0,4 kW
Secondary voltage 24V DC
Fuse-protection 1x 6,3A
Compressed air supply 5 bar and 10 l/min
Controller CAN/MM100 and CAN/MS1
Operation via control desk CAN/P50
Programme version V 40.11
Order No. 00192 169-01 User Manual - Productivity Lift
E_SPLFS03_V40_11_0300_200300_V1_14.doc Last update: 20.03.2000 - Version V 1.14 Page 54
11 Description of interface
An interface is required between adjoining machines for take-over or hand-over processes.
Our machines can be equipped with different interfaces. A change of interface always requires
the connection of suitable connecting facilities. Interface modifications without connecting the
right connecting facilities may result in a functional error and possibly cause an electrical fault.
We would be glad to provide you with information regarding difficult aspects of modifying
interfaces.
1. When the machine is equipped with interface as the Siemens Definition describes, a 37-
pin AMP plug and socket are used for the connection (refer to Siemens).
2. When the machine is equipped with interface as the SMEMA Definition describes, refer to
SMEMA.
11.1 SMEMA interface definition
When the machine is equipped with interface as the SMEMA Definition describes, a 14-pin
AMP plug and socket are used for the connection.
SMEMA interface definition releases at the signal potential free contact.
11.1.1 Inlet side
Pin Signal description
1 24V from machine n-1
2 Output relay contact Ready to machine n-1
3 24V from ASYS machine
4 Prompt loop input 21 of machine n-1
11.1.2 Outlet side
Pin Signal description
1 24V from ASYS machine
2 Ready loop input 23 of machine n-1 Switched Pin 1
3 24 V from machine n+1
4 Output relay contact Prompt to machine n+1
Order No. 00192 169-01 User Manual - Productivity Lift
E_SPLFS03_V40_11_0300_200300_V1_14.doc Last update: 20.03.2000 - Version V 1.14 Page 55
11.2 SIEMENS interface definition
When the machine is equipped with interface as the Siemens Definition describes, a 37-pin
AMP plug and socket are used for the connection.
At the inlet:
Pin 28 24V from machine n-1
Pin 29 Interference loop outlet to machine n-1
Pin 30 Own earth connection
Pin 31 Arrived - signal outlet for machine n-1
Pin 32 Ready - signal outlet for machine n-1
Pin 35 Handed over - signal inlet
Pin 36 Demand - signal inlet
Pin 37 Earth connection from machine n-1
At the outlet:
Pin 28 24V from machine n+1
Pin 29 Interference loop outlet to machine n+1
Pin 30 Earth connection of the next machine
Pin 31 Arrived - signal inlet
Pin 32 Ready - signal inlet
Pin 35 Handed over - signal outlet for machine n+1
Pin 36 Demand - sig nal outlet for machine n+1
Pin 37 Own earth connection
11.3 Interface module
Figure 73: Interface modul AMI 2-x
LEDs Out
p
ut
g
reen
LEDs Inlet 0r.
SS1 Arrived
SS1 Read
y
SS2 Handed
SS2 Demand
SS1 Interference
SS2 Arrived
SS2 Read
y
SS1 Handed
SS1 Demand
SS1 SM1
SS2 SM2
DC 24V