METCAL烙铁头规格书.pdf - 第14页
P a g e | 12 Ultra-Fine Conical Cartridge UFC- 6 CN5502R UFC- 7 CN5502R Bent 30 °, for work under a micro scope, (ø x L) 0.2 x 5.6 mm UFC- 6 CN5504S UFC- 7 CN5504S 0.4 x 5.1 mm UFC- 6 CN5504R UFC- 7 CN5504R Bent 30 °, fo…
P a g e | 11
UFC Ultra-Fine Cartridges for work in tight spaces, compatible with CV-5200,
CV-500 Systems and Ultra-Fine Solder Hand piece CV-H2-UF.
Temperature CV-Series Application
UFC-6
Temperature Sensitive
UFC-7
Most Standard
Please note the above temperatures are the maximum temperatures of the heater. The idle temperature is dependent on the geometry
of the cartridge.
Ultra-Fine Chisel Cartridge
UFC-6CH5106S
UFC-7CH5106S
(W x L) 0.6 x 5.1 mm
UFC-6CH9006S
UFC-7CH9006S
Long reach,
(W x L) 0.6 x 9 mm
UFC-6CH5108S
UFC-7CH5108S
(W x L) 0. 8 x 5.1 mm
UFC-6CH9008S
UFC-7CH9008S
Long reach,
(W x L) 0.8 x 9 mm
UFC-6CH5112S
UFC-7CH5112S
(W x L) 1.2 x 5.1 mm
Ultra-Fine Conical Cartridge
UFC-6CN5101S
UFC-7CN5101S
(ø x L) 0.13 x 5.1 mm
UFC-6CN5102S
UFC-7CN5102S
(ø x L) 0.2 x 5.1 mm
675 °F/357 °C
775 °F/413 °C
P a g e | 12
Ultra-Fine Conical Cartridge
UFC-6CN5502R
UFC-7CN5502R
Bent 30°,
for work under a microscope,
(ø x L) 0.2 x 5.6 mm
UFC-6CN5504S
UFC-7CN5504S
0.4 x 5.1 mm
UFC-6CN5504R
UFC-7CN5504R
Bent 30°,
for work under a microscope,
0.4 x 5.6 mm
UFC-6CN8004S
UFC-7CN8004S
For work in tight spaces,
long reach,
0.4 x 8.0 mm
Ultra-Fine Rework Hoof-Cartridges – For Drag Soldering SOICs/QFPs
UFC-6HF5108S
UFC-7HF5108S
Micro Hoof,
(Bevel/L) 45° x 1.13 mm,
(ø x L) 0.8 x 5.1 mm
UFC-6HF5112S
UFC-7HF5112S
Micro Hoof,
(Bevel/L) 45° x 1.71 mm,
(ø x L) 1.21 x 5.1 mm
P a g e | 13
HCV Cartridges for High Thermal Demand applications with increased heating elements are
compatible with MX-5000, MX-5200 and CV-5200 Systems
MX-H6-HTD, CV-H6-HTD, CV-H7-HTD Solder Hand pieces.
HTC Cartridges for High Thermal Demand applications are compatible with
MX-5000 and MX-5200 Systems – MX-H6-HTD Solder Hand pieces.
Temperature CV-Series
MX-Series
Application
HCV-7 HTC-7
Most Standard
HCV-8 HTC-8
Ceramic and High Thermal Demand
HCV-9 HTC-9
Please note the above temperatures are the maximum temperatures of the heater. The idle temperature is dependent on the geometry of
the cartridge.
For High Mass Applications
HCV-7CN0020S
HCV-8CN0020S
HCV-9CN0020S
HTC-7CN0020S
HTC-8CN0020S
HTC-9CN0020S
Conical,
(ø x L) 2 x 8.3 mm
HCV-7CH0015S
HCV-8CH0015S
HCV-8CH0015S
N/A
Chisel,
(W x L )1.47 x 10.4 mm
Chisel,
(W x L) 1.85 x 10 mm
HCV-7CH0018S
HCV-8CH0018S
N/A
HCV-9CH0018S
HCV-7CH0025S HTC-7CH0025S
Chisel,
(W x L) 2.5 x 8 mm
HCV-8CH0025S HTC-8CH0025S
HCV-9CH0025S HTC-9CH0025S
775 °F/413 °C
875 °F/468 °C
950 °F/
510 °C