DFD6361-Maintenance - 第11页

Contents-5 CONTENTS 2-2. Error Code List ............................................................................................... D-14 ÿ 2-3. Remedi es for Errors Requiring Emerg ent S top ........................…

Contents-4

CONTENTS

4. Sensor/Solenoid Valve Check.............................................................. C-27ÿ

4-1. I/O Check .......................................................................................................C-28ÿ

4-2. Axis Sensor Check .........................................................................................C-38ÿ

5. Customizing Setting ............................................................................. C-42ÿ

5-1. Setting on USER DEFINE DATA Screen [Screen 7.4]....................................C-43ÿ

6. Device Data Maintenance .................................................................... C-50ÿ

6-1. Deleting Device Data......................................................................................C-51ÿ

6-2. Moving Device Data.......................................................................................C-52ÿ

6-3. Deleting Directories........................................................................................C-54ÿ

6-4. Renaming Directories.....................................................................................C-56ÿ

6-5. Changing Values of Device Data....................................................................C-57ÿ

7. Maintenance Scheduler........................................................................ C-64ÿ

7-1. Calling up the MAINTENANCE SCHEDULER Screen...................................C-65ÿ

7-2. Updating LAST MENT DATE..........................................................................C-68ÿ

7-3. Changing DAYS SET......................................................................................C-69ÿ

7-4. Changing the Maintenance ITEM...................................................................C-70ÿ

7-5. Deleting the Maintenance ITEM.....................................................................C-71ÿ

8. Maker Data........................................................................................... C-72ÿ

9. SECS/GEM Setup [User-Specified Specification]................................. C-73ÿ

D. TROUBLESHOOTING........................................D-1

1. Remedies for Problems Invoking No Error Code Indication

- Problems at Power ON - ...................................................................... D-2ÿ

1-1. Main Circuit Breaker Problems.........................................................................D-3ÿ

1-2. Main Power Supply Problems ..........................................................................D-4ÿ

1-3. POWER Lamp (Power-On Lamp) Problems ....................................................D-6ÿ

1-4. Touch Panel Problems......................................................................................D-7ÿ

1-5. Microscope Light Source Problems................................................................D-10ÿ

1-6. EMO Switch Problems....................................................................................D-11ÿ

2. Remedies for Problems Invoking Error Code Indication ....................... D-12ÿ

2-1. Error Code Classification................................................................................D-13ÿ

Contents-5

CONTENTS

2-2. Error Code List...............................................................................................D-14ÿ

2-3. Remedies for Errors Requiring Emergent Stop ..............................................D-21ÿ

2-4. Remedies for Blade/Setup-Related Errors .....................................................D-50ÿ

2-5. Remedies for Valve-Related Errors................................................................D-76ÿ

2-6. Remedies for Alignment-Related Errors.......................................................D-106ÿ

2-7. Remedies for Kerf Check-Related Errors.....................................................D-121ÿ

2-8. Axis-Related Error Remedies.......................................................................D-133ÿ

2-9. Remedies for Other Errors ...........................................................................D-144ÿ

E. MAINTENANCE AND

PERIODIC INSPECTION....................................E-1

1. Maintenance Whose Interval Differs Depending on

the Machine Use Conditions of the Device............................................. E-3ÿ

1-1. Cleaning the Non-Contact Setup Sensor (Detection Surface)

[OptionalAccessory].........................................................................................E-4ÿ

1-1-1. Calling up the NCS SENSOR CLEANING screen [screen 4.8]...............E-6ÿ

1-1-2. Cleaning of the non-contact setup sensor...............................................E-8ÿ

1-1-3. Cleaning the non-contact setup sensor with abrasives

[Optional accessory]............................................................................E-10ÿ

1-1-4. Adjusting the non-contact setup amplifier .............................................E-12ÿ

1-1-5. Completion of cleaning the non-contact setup sensor ..........................E-16ÿ

1-2. Cleaning the Blade Breakage Detector Sensor..............................................E-17ÿ

1-2-1. Removing the blade breakage detector................................................E-18ÿ

1-2-2. Cleaning the blade breakage detector sensor ......................................E-20ÿ

1-2-3. Adjusting the amplifier of blade breakage detector...............................E-23ÿ

1-2-3-1. Moving the Y (Y1, Y2)-axis....................................................................................E-26ÿ

1-2-3-2. Removing the partition (left) ..................................................................................E-27ÿ

1-2-3-3. Adjusting the amplifier of blade breakage detector...............................................E-29ÿ

1-2-4. Completion of cleaning the blade breakage detector sensor................E-30ÿ

1-3. Cleaning the Spindle ......................................................................................E-31ÿ

1-3-1. Removing the blade and flange/hub mount ..........................................E-34ÿ

1-3-2. Removing the wheel cover....................................................................E-35ÿ

1-3-3. Cleaning the spindle main body............................................................E-37ÿ

1-3-4. Completion of spindle cleaning.............................................................E-38ÿ

FYI: Possible problems of the spindle due to stains........................................E-38ÿ

1-4. Cleaning the Touch Panel...............................................................................E-39ÿ

Contents-6

CONTENTS

2. Maintenance and Inspection to Be Done Every Day............................. E-41ÿ

2-1. Maintenance and Inspection Before Turning ON the Power...........................E-42ÿ

2-2. Maintenance and Inspection After Turning ON the Power..............................E-43ÿ

3. Maintenance to Be Performed at 7-Day

(Recommended) Intervals.................................................................... E-44ÿ

3-1. Cleaning the Cutting Room ............................................................................E-45ÿ

3-1-1. Cleaning the water case exterior...........................................................E-47ÿ

3-1-2. Cleaning the water case interior............................................................E-49ÿ

4. Maintenance to Be Performed at 30-Day

(Recommended) Intervals.................................................................... E-51

4-1. Conditioning the Flange..................................................................................E-51ÿ

5. Maintenance to Be Performed at 183-Day

(Recommended) Intervals.................................................................... E-52ÿ

5-1. Conditioning the Hub Mount...........................................................................E-52ÿ

5-2. Greasing the ElevatorAxis.............................................................................E-53ÿ

5-2-1. Preparation of greasing the elevator axis..............................................E-55ÿ

5-2-2. Greasing the elevator axis....................................................................E-57ÿ

5-2-3. Completion of greasing the elevator axis..............................................E-59ÿ

5-3. Greasing the Frame Centering Axis ...............................................................E-60ÿ

5-3-1. Preparation of greasing the frame centering axis..................................E-62ÿ

5-3-2. Greasing the linear guide......................................................................E-64ÿ

5-3-3. Completion of greasing the frame centering axis..................................E-66ÿ

5-4. Cleaning the Spindle Coolant Water Path ......................................................E-67ÿ

5-4-1. Preparation of cleaning the spindle 1 coolant water path......................E-69ÿ

5-4-2. Cleaning the spindle 1 coolant water path ............................................E-70ÿ

5-4-3. Completion of cleaning the spindle 1 coolant water path......................E-71ÿ

5-4-4. Preparation of cleaning the spindle 2 coolant water path......................E-72ÿ

5-4-5. Cleaning the spindle 2 coolant water path ............................................E-73ÿ

5-4-6. Completion of cleaning the spindle 2 coolant water path......................E-74ÿ

6. Maintenance to Be Performed at 365-Day

(Recommended) Intervals.................................................................... E-75

6-1. Cleaning the Vacuum Ejector.........................................................................E-76ÿ

6-2. Greasing the X-axis........................................................................................E-79ÿ

6-2-1. Preparation of greasing the X-axis........................................................E-82ÿ

6-2-2. Cleaning the right-hand X-axis and its periphery ..................................E-83ÿ

6-2-3. Cleaning the left-hand X-axis and its periphery.....................................E-85ÿ