DFD6361-Maintenance - 第110页

B-38 2-3. Flange R eplacement (1.8 kW S pindle) [Optional Accessory] Operation flow The flange re placement procedure consists of the following steps. 2-3-1 Removing the flange (1.8 kW spindle) 2-3-2 Mounting the flange …

100%1 / 720
B-37
Procedures for mounting the hub mount (1.2 kW spindle) (Continued)
Step No. Do This
11
Turn ON the spindle.
- Maximum rotating speed: 60,000 min
-1
(60,000 rpm) for 2-inch
blade
12
Turn OFF the spindle.
13
Call up the BLADE REPLACEMENT screen [screen 4.1].
- The Y-axis moves to its origin position.
14
Press the Disco's logo button located at the upper left of the
screen to lock up the touch panel.
15
Open the splash cover.
16
Torque the lock bolt to 4.0 N·m again.
17
Press the <Close> button to release lock of the touch panel.
18
Perform a conditioning operation.
- For the conditioning procedures;
See the section C-2, [Hub Mount/Flange Conditioning].
19
Install the blade.
- For the blade installation procedure;
See the section B-6, [Blade Maintenance]. of the Operation
Manual.
20
Close the splash cover.
21
Press the <System Initial> button to effect system initialization.
B-38
2-3. Flange Replacement (1.8 kW Spindle)
[Optional Accessory]
Operation flow
The flange replacement procedure consists of the following steps.
2-3-1 Removing the flange (1.8 kW spindle)
2-3-2 Mounting the flange (1.8 kW spindle)
Type of the spindle and flange
Spindle Name
1.8 kW spindle R-type flange
Before operation
Have on hand the following jigs for flange replacement.
Jig Name Function
Bit
Torque wrench
Used to remove or mount the flange B
and flange B lock nut, which secure
flange type blades.
Nut demounting jig Used to remove or mount the flange B.
FlangeA removing jig Used to remove the flange A.
[Other]
Alcohol / Lint-free waste
B-39
Torque wrench set (1.8 kW Spindle)
It is used to remove the lock bolt.
Torque wrench
Bit
Jig Name Part No.
Bit (S4) MOKBN005
Torque wrench MOKBN010
Nut demounting jig (1.8 kW Spindle)
It is used to remove or mount the flange B lock nut.
Jig Name Part No.
Nut demounting jig MAKBN003--A