DFD6361-Maintenance - 第171页

B-99 3-4-2. Mou nting the spinner t able Procedur es for mo unting the spi nner tabl e Step No. Do This (Continued from the previous section) 1 With a lint-free cloth moistened with alcohol, clean the spinner table to be…

100%1 / 720
B-98
Procedures for removing the spinner table (Continued)
Step No. Do This
6
Remove the spinner table.
7
With a lint-free cloth moistened with alcohol, clean the removed
spinner table.
8
Enclose the cleaned spinner table in the packing material, to
avoid flaws, and then store it.
Continued in the next section.
B-99
3-4-2. Mounting the spinner table
Procedures for mounting the spinner table
Step No. Do This
(Continued from the previous section)
1
With a lint-free cloth moistened with alcohol, clean the spinner
table to be installed and the table base.
2
Set the spinner table on the table base.
3
Screw down the all retaining screws of the spinner table.
4
Close the rear arm section cover.
Continued in the next section.
B-100
3-5. Changing the Frame Clamp Size
Procedures for changing the frame clamp size
Step No. Do This
(Continued from the previous section)
1
Press the <F1> button on the CHANGE FRAME SIZE screen
[screen 6.1].
- The upper arm moves to above the spinner table.
2
Press the <F2> button on the CHANGE FRAME SIZE screen
[screen 6.1].
- The lower arm moves to above the spinner table.
3
Visually make sure that all drive sections stop completely.
4
Open the front arm section cover.
5
While pulling the frame clamp handle, which is located at the
side of the chuck table, slide the frame clamp to change its
position to suit the frame size to be used.
Frame size positioning holes
Frame clamp handle
* The frame clamp is unlocked
when the handle is pulled.
Sliding direction