DFD6361-Maintenance - 第213页
C-1 C. ENGINEERING MAINTENANCE OPERATIO NS Cont ents of t his ch apter This chapter d escribes th e maintenance works req uired for the p roper machi ne operation, the methods of inspecting the operation of each axis or …
B-140
Procedures for setting monitor value of clean air pressure for spinner atomizing nozzle
(Continued)
Step No. Do This
1
Press the <F6> button on the MAIN MENU screen [screen 0.0].
- PASSWORD screen is called up.
2
Type the user password and press the <ENTER> button.
- The MACHINE MAINTENANCE screen [screen 6.0] is called
up.
3
Press the <F6> button on the MACHINE MAINTENANCE
screen [screen 6.0].
- The SENSOR THRESHOLD DATA screen [screen 6.6] is
called up.
4
Set "0.200MPa" as the lower limit of atomizing clean air (N
2
)
pressure, and then press the <ENTER> button.
- The machine updates the data.
C-1
C. ENGINEERING MAINTENANCE
OPERATIONS
Contents of this chapter
This chapter describes the maintenance works required for the proper machine
operation, the methods of inspecting the operation of each axis or sensor and
the methods of setting up the user-customized machine function.
Note that some engineering maintenance tasks have to be carried out with the
interlock feature disabled by the maintenance switch.
Before performing maintenance, the maintenance personnel must have a good
understanding of the safety precautions.
Section No. Title Contents
1 Calling up
ENGINEERING
MAINTENANCE Screen
- Procedures for calling up the
ENGINEERING
MAINTENANCE screen
- Details of the ENGINEERING
MAINTENANCE screen
2 Wheel Mount/Flange
Conditioning
- Movements in the conditioning
- Conditioning procedure
3 Axis Operation Check - The ways of abnormality check
by operating each axis
individually
4 Sensor/Solenoid Valve
Check
- The ways of abnormality check
by individually operating each
sensor and solenoid valve
- The ways to check each axis
sensor status
5 Customizing Setting - The ways to customize the
various machine functions to suit
individual user requirements
6 Device Data Maintenance - Deletion/moving/renaming of
the device data
- Deletion/renaming of the
directory
- Change the setting values of the
device data in one directory by
one operation
C-2
Contents of this chapter (Continued)
Section No. Title Contents
7 Maintenance Scheduler - Procedures to display the
MAINTENANCE
SCHEDULER screen that
enables you to specify the parts
replacement timing or periodic
maintenance cycles
- Details of the screen
- Procedures to set the schedule
8 Maker Data - Notes on the maintenance screen
used by DISCO personnel
9SECS/GEMSetup
[User-specified
specification]
- This is the setup for the function
to manage data stored by the
machine and collect data of the
machine operation.
For information about this
specification, see the technical
documentation provided from
DISCO.